Charles:
I use Iolo a lot and have for a number of years now. Drive Scrubber is just that, it will scrub the drive of any data that has been written to it , without touching the disc vendor's data.
When you format a drive, you essentially write 1's and 0's to the used section of the disc which then allows it to be rewritten. It does not write to all areas of the drive. Also, during the format the fat or File Allocation Tables for DOS 7 and previous versions and NTFS for NT and after OS's such as XP/Vista/Windows 7. If you are a tech or a geek or just like to play with puters and have access like I have to low level utilities, then you can literally return the drive to factory specs when you format. Does the same thing as Disk Utilities like Seagate's DiscWizard. It will wipe everything right down to a virgin disc status then rebuild the MBR and FAT/NTFS file system.
So, go ahead and utlize Drive Scrubber.. it will only wipe retrievable data that you wrote to the drive. The records for the drive itself should remain untouched. I have RMA's many drives over the years.. to Seagate, Western Digital, Quantum, Conner Peripherals, Maxtor, Fuji -- this list goes on and on. Never had a problem with RMA's even when I have used the utilities from the disc vendors. Drive Scrubber should not cause a problem.
Oh.. btw..... a normal format will generally result in the deletion of the files on the hard drive. It takes a very determined and lengthy manual restructing of the erased data on the drive to make much of it useable again. I highly doubt Seagate is interested in deploying that kind of resources for a simple end user drive being RMA's. I understand the security concerns, but they would be minimal. Drive Scrubber is sufficient to completely wipe all user data.