Coal boilers home heating???????

Jackman

501 Club
Anyone heat with coal, tell me about your system? What brand is your boiler? I am going to look for a cast iron wet base coal boiler to hook up as a preboiler to my Weil Mclain oil fired wet base. I want to burn real coal Anthracite not bag or processed coal ...... I know nothing about coal but my house originaly had a coal sytem , we have a double flue chimney and a coal bin and I also have a 1 ton dump truck so I could put 2 tons in the truck and then fill the bin so it seems to make sense to me........ Whats a real good brand of Coal boiler....... Any dangers to burning coal? How about chimney cleaning is that an annual maintenace with coal? How about chimney fires is that a possablity with coal? If I burn coal will I have a oder of burnt coal simalar to that of a wood stove?
 
The big issue, at least here in Ohio, would be where would you find a retail source for the coal within reasonable hauling distance. I would love to be burning coal to heat my shop.
 
GW thats my trouble here in GA , no place to buy coal here. my furnace will burn coal or wood which is all that i heat with. a little work involved with the wood but we grew up cutting and chopping would and so shall my kids.
 
George Willer":260qlg3c said:
The big issue, at least here in Ohio, would be where would you find a retail source for the coal within reasonable hauling distance. I would love to be burning coal to heat my shop.


We have a large bulk retail coal dealer locally and I have a dump truck , just need to find a good boiler and learn a bit about burning coal......... This should work cause my house ran on coal for 60 years before they switched to oil base board heat..........
 
I would bet all of the nice "self stoker" coal furnaces were scrapped and replaced with cheaper oil units in the "60's. If one had one in good condition; you could probaly save money on heat.
I haven't checked coal prices around here. I only use a few bags a year for blacksmithing, and a while back I cleaned out a coal bin for a free supply.
The trains roll by about a mile from my house; hauling WVA coal to Norfolk to load on ships. It is my understanding that because of the grade, an engine can pull more loaded cars down there, than it can pull empty cars back.
Best,
Mike
 
Mike I agree an old time self stoker would be sweet but there all gone to the scrap yards , and I think new would be best but got find a good manufacturer though :? ......... Check this link to my local coal supplier, he has a pretty decent size business and no competion for many miles........ http://www.cornwallcoal.com
 
Hi Jack

I burn two tons of soft coal in my wood stove last year. I would say coal has three times the heat of wood. With the soft coal I had to be careful and open the stove door slowly or the flames would flare up and out the door. Also most of the soft coal gave off a gas that would give me a headake. There is no creosote in coal so you do not have to worry about a chiminy fire. But it does have a lot of buildup in the chiminy. And makes a big mess when cleaning it. Its fine and powdery and gets everywhere and does not want to wash off. I got my coal from Wassion OH $155 a ton for soft coal and $230 for hard.

Billy
 
A quick look at the Chemical Engineer's Handbook shows me that soft coal has a heat content of 15,500 BTU/Lb while hard coal has only 14,700 BTU/Lb. Of course this will depend on purity and which mine it comes from, but it looks like soft coal is a much better deal.

Going to Mark's Mechanical Engineer's Handbook, the best I can figure, red maple, for example, would produce about 7,690 BTU/Lb, or very roughly half of what coal produces. The surprise is that cottonwood has the most heat per Lb...but there are far less pounds in a cord. :(

Now I'd like to know the name and number for the coal company in Wauseon, OH. It's only about 60 or 70 miles from me.
 
My MIL has her old coal burner in the basement still with its asbestos wrapping still on it! (asbsetos has been sheeted and covered, thankfully) Along with this, she still has the "automatic fireman" which will feed coal in the fire when the furnace calls for more heat. It must be from the late 40's or early 50's because the green color gives it away! (seafoam green)...

Wonder if that is worth some money to someone? She also has probably at least a half ton of coal in the corner of the basement from the last time the coal furnace was used... at least 35 years ago from before she bought the house!!

Mike in La Crosse, WI
 
Cowboy":77a6cycr said:
Hi Jack

I burn two tons of soft coal in my wood stove last year. I would say coal has three times the heat of wood. With the soft coal I had to be careful and open the stove door slowly or the flames would flare up and out the door. Also most of the soft coal gave off a gas that would give me a headake. There is no creosote in coal so you do not have to worry about a chiminy fire. But it does have a lot of buildup in the chiminy. And makes a big mess when cleaning it. Its fine and powdery and gets everywhere and does not want to wash off. I got my coal from Wassion OH $155 a ton for soft coal and $230 for hard.

Billy

Billy ,

Cool you heat with coal :D 2 question for you ....... Does your coal unit share a chimney with another unit ie oil, gas or wood? What do you have a coal stove , boiler or furnace? Hoping you have a boiler, if so what brand is it and do you recomend that brand? Assuming that coal boiler manufactures are like the manufactures of oil and gas boilers I need to determine which brands are the good quaity and so far thats the hard part cause there are no dealers of coal boilers in my area so I have surfed the net but I can't tell much from the pics and info that I have found.... locally I can get Antracite stove coal (hard Coal) for 240 per ton seems reasonable to me considering that oil is now 4 dollars per gallon :twisted: with no end in sight to the high cost of oil......
 
Thanks George. Glad to see ya feeling better. The coal place is about ten minuts from Rick P place.

Dennis Coal & Stove
10437 County Rd D (between 10 & 11)
419-335-4665

Jack. Currently the stove is sharing the chiminy with the water heater and furnance. I know its not right but I am getting plenty of draft. I am going to a electric water heater. I am also looking for a used oil furnance to see if I can burn strait vegtable oil in it. I am planting 40 acers of sunflowers this year and am going to press the oil out of it.

Sorry I do not have a boiler system nor do I know anything about them. Floyd Dennis sells stoves a you might check with him and see if he knows anything about the boiler systems.

Billy
 
Thanks Billy, that place should be easy to find. It's on the first road south of this landmark. An internet search found a lumber and coal company right in Wauseon, that probably forgot to change their name when they stopped selling coal.

closeup_2.jpg
 
Cool George

I drive the back roads I must have went around it 8) Dennis sells their coal out of a pole building in there back yard for bagged coal and the bulk coal is picked up about a mile down the road at the other brothers place.

Billy
 
I've got a Vermont Castings Wood Stove that has a drop in Coal Magazine and grate. It heats very well although at a much lower operating temperature than wood. I've always like the smell of burning coal especially on a foggy morning with the coal smoke mixing with the fog.

I've not used the coal magazine in the last few years as I can get all the Bois'D Arc wood I need for free.
 
Back
Top