Cheap Grease at TSC.

Lithium is good grease, BUT--- You will want to use cheap grease that will separate when greasing the throw out bearing. The bearing is porous, and the grease permiates it.
 
I bought some cheap grease at Big R (Farm Store) that is perfect for the throwout bearing. It turns to like a thick oil in short order. Not good for anything else though. I didn't buy it intentionally for that, I just picked up the cheapest stuff they had.


Tom
 
After years of using different grease and finding all the bad ones, I finally have found a good set up.

I use Mystic JT-6 red grease in all my wheel bearings, and other high speed/high temp bearings.

I use Caterpillar Desert Gold Grease, a 5% moly grease in all my high pressure bushing and metal to metal applications and general chassie use.

The Mystic JT-6 can be used in all applications, I just find the Cat desert gold does better on metal on metal contact. And because it's a calcium based grease, it doesn't wash out nearly as bad.

Just don't use it in high speed/temp bearings, it has too much tack additives for that, and the bearings won't be properly lubed.

Later

Hank
 
I dont use lithium on the TOB, for that I use some old axle grease that my dad has had from about the 60s. But I use white lithum on almost everything else since, I regrease pretty regularly.
 
just got back from TSC and the 10 tubes of white lithium grease was $15 instead of $10---oh well i just considered that another wild goose chase :lol:
 
Back
Top