Changing fuel filter on a GM Yukon

Paul_NJ

501 Club
Why does everything get so complicated anymore?

Has anyone changed the fuel filter on a GM truck? I've got a 2002 Yukon.

I know I've got a serviceable filter, and I know it's underneath, although apparently after my model year they began putting them inside the tank with the fuel pump, which is even more crazy. I can see it and it only has a normal flare nut fitting on the back end. I don't even recognize the kind of fitting that is on the engine side. Apparently this is called a "flex filter", whatever that means. I read I need a special tool?

I suppose after 130K I should change it. The temptation is to take it in to a shop, but I haven't given up hope . . . yet. I'll bet they'll take the better part of a 100 bill to do it for me.

I have a pressure gauge, and I can blowdown the pressure. Can someone step me through the rest of the procedure?
 
Yes you need the special tool to disconnect the line. You could go to your auto parts store and see if they can got you one.
What I do is call up the shop and see what would it cost to replace it. I would tell them you are bring in your own fitler. Then go from there.
Kyle
 
I would agree with Kyle, it probably would be easier to have a shop do it, given that it has never been replaced before. Corroded lines can be a problem with this design and if you break or crack them you are in trouble. The fuel pressure is 65psi at least at the filter.

Flate rate is .6 of an hour or 36 minutes to replace the filter, the filter is around $20.00 for an AC Filter.

Hope this helps

Mark
 
Call around and see what you can find, we change them at our shop for about $15
I went to change mine a while back on my 05 Silverado and just like you said, it's in the tank withthe pump....
Really dumb idea, ha problems a while back and needed a new fuel pump. $350 my price through the shop where I work.. :(
Boy, we've come a long way... :roll:
 
Back
Top