case 2150 ih red

[dave hoffman]

I want to try case/hi 2150 red. What paint/thinner/hardner ratio do you suggest

 

[ricky racer]

It's good paint, I've used it before. I'd follow the instructions on the can. The reducer used will be dependent on the temperature you're painting in.

 

[staninlowerAL]

Be sure to use the recommended P P E! There's a lot of information about this topic so don't put yourself (and others) at risk. JMHO Stan

 

[tst]

IH enamel is good, use a hardner or it will fade in the sun

 

[Super A]

I am NOT an expert when it comes to painting, but be aware, the "new" 2150 at caseIH dealers is a new formulation from the old Irongard 2150. There are people online that don't like it, but my personal opinion is they're not doing the right surface prep, gun setup, etc. I'd do some research (from reliable sources!) before I started spraying.

Al

 

[yellowcub]

I have the same question, what reducer and hardner brand/ type works with that paint and what is the mixing ratio? Example Imron 3:1 and I know all about PPE and the difference between, fast, slow etc. Years ago, I did IH Yellow with RM reducer 4:1. I am guessing with hardner and reducer it is 8:1:1.

 

[ricky racer]

I have the same question, what reducer and hardner brand/ type works with that paint and what is the mixing ratio? Example Imron 3:1 and I know all about PPE and the difference between, fast, slow etc. Years ago, I did IH Yellow with RM reducer 4:1. I am guessing with hardner and reducer it is 8:1:1.

All of that info should be on the component cans.

 

[Glen]

Hi,
If you have questions about the paint, that you can't find an answer for, you could ask at the Case IH dealer in your area.
Ask for the person there that knows the most about their paint.