Carb Cleaner

junkman1946

501 Club
Several years ago I found a recipe for a carb cleaner to be used in a small dip tank. I used this formula very succcessfully and did namy, many small carbs. Well its finally gaining the consistency of mollasses, from so many contaminents, guess what; I cant remember what solvents I used to make it.(C.R.S.) Does anyone else have this recipe, or know of a good substitute. Commercial carb cleaner is going for around $45. gal. Thanks and MERRY CHRISTMAS Frank,Janet, and the Rugrats.
 
I got a gallon of, I believe, Berryman carb cleaner last year from Auto Zone for about $20. It even includes a dipping tray. I know if you look at NAPA it is out of sight.
 
I’ve heard of :

Strip-Eze (paint remover). Be sure to remove any plastic parts before you dip, and have plenty of ventilation.

Easy-Off

Lacquer thinner

If you don’t want to spend the money for the good stuff, take the carburetor to a shop and let them “dip it”. Maybe they will do it for a reasonable cost.
 
I also get my Berryman Chem-Dip from a local auto parts store for a little over $20. Been using the same can for several years.

0996-LR.jpg
 
Don wrote:
Been using the same can for several years.
I'm pretty sure that's the stuff I use. I've been using it for years, and it's getting a little grundgy.

Using this stuff, carb cleaner spray, and an air hose, you can put any carb back in running order. I always use a little wire to make sure the tiny orifices are clear. Obviously check the float for leaks and correct float level specs.

When using this stuff I try to wear rubber gloves and safety glasses. But I always wind up tearing the gloves and having my hands smelling like that stuff for the rest of the day.

The boss says "hands off" during this time, but she should know by now that I can go for long periods of time.......oh well!:oops:

My2 cents.
Larry
 
I had some carb cleaner from BIG A auto parts a few years back in the green gallon can. It would eat the chrome off a trailer hitch just like the pancake batter carb cleaning stuff we had many years ago. You couldn't put your hands in it.
 
Don McCombs":nlp1b9ph said:
I also get my Berryman Chem-Dip from a local auto parts store for a little over $20. Been using the same can for several years.

0996-LR.jpg

Don:

We can't get it here, period. I have been trying for almost 2 years now and still no luck. Darn.. oh well some day...

I know lacquer thinner will work although I am not sure of how hard on pot metal it would be though for extended periods of dunking. Curious, just not gutsy enough to toss in a carb into a pail of lacquer thinner for a few days to experiment.
 
Hi Junkman, I don't know of the recipe, or haven't tried these other dips the other guys are talking about. But, as Jack says, oven cleaner really works good. I also like to flush tanks out with oven cleaner.

Carbs I take into work and use the parts washer with saftey-clean. Then I take my torch tip cleaners and make sure all the passages are open. Then I put it in the glass beader to get rid of the stubborn crud, and the outside of the carb.(just make sure you don't hang on the mating surfaces too long) I know alot of guys don't agree with glass beading, but I've never had any problems with media clogging anything up. Then I blow it out real good with an air nozzle. I've been doing it this way for about 20 years, and every one looks like new when I'm done. It works great for the cast iron carbs, then paint with tractor color. It works good for the alumminum carbs, gives it a nice new look to them. Even works great on the brass one on our Farmall Regular.

Just my two cents
 
I found white buildup in my Honda 55 carb and I soaked it in vinegar to clear that stuff off. Only soaked it for a half hour though then rinsed well. Not an overnight soak, right Larry? (Buzzardwing) :lol:
 
Thanks for the tips. Found the Berrymans in Auto Zone today $20. Just shows to go ya- you gotta shop around -$25 difference in price from 2 stores 1/2 mile apart. BTW I have used laquer thinner extensively for years, will NOT damage metal parts. Ditto for Acetone. But remove any plastic first. Frank
 
Just a quick reminder about using oven cleaner (cleaning ingredient is lye). I use it to clean cast iron cookware of all the years of baked-on crud, grease, whatever. It only works above about 60 degrees F, it'll eat aluminum and wood like mad, the fumes are lethal so use outside with gloves and glasses. Stronger concentration of lye = quicker results; higher temps = quicker results (I use a Rubbermaid 20 gal tub w/lid and put it in the direct summer sun and let it cook) No need to buy expensive oven cleaner - go to grocery or hardware store and get cans of Lewis's Lye. Craig
 
Back
Top