Camcorder battery

Bus Driver

501 Club
For the rare occasion where I want to make video, my camcorder is RCA (from the days when it was good stuff) VHS-- cost over $1000 new. Uses a 12 volt rechargeable battery. PV-BP50 or equivalent. Do have equipment to do excellent transfer from VHS to DVD.
Last used it 3 years ago. The battery has been on the charger for that period of time-- now is dead.
New battery is about $43 with tax. Not sure how old it might be since manufacture.
Should I just buy new video camera? Suggestions for which to buy? Alternate power supply for my present camcorder?
 
From what I see, that appears to be a Panasonic battery, and it as well as the AG456 replacement are all over the web in the $25 price range. as the AG456 replacement.

Note, those are sealed lead acid batteries and do NOT like being left on chargers indefinitely.
 
Not sure where my mind was about the brand name-- my camcorder is a Panasonic, not RCA.
So I bought a new battery, made in Taiwan. It tests to be fully charged, has a bit over 12 volts. But the camcorder does nothing with the battery power. The camera acts as if the battery is dead. It powers up fine with the adapter cord from the charger.
Never stored with battery installed, never had one of these batteries to leak anywhere under any circumstances.
So now portability is gone. Suggestions for diagnosis and repair?

What would you suggest for new video camera?
 
We have some medical equipment at work that uses that style of battery. Try Unipower batteries in Minnesota. That is who we use.
 
Bus Driver":20ocz1pc said:
******
So now portability is gone. Suggestions for diagnosis and repair?

What would you suggest for new video camera?
Sorry I took so long to get back, but I can think of two possibilities just off hand. First, is that even though you just got that battery, it may be old and when the camera tries to draw power the voltage drops to the point the camera thinks it has a dead battery, in which case cubbrian has the solution. Second, Most all complicated electronic equipment has voltage sensors in the power supply that when the voltage gets so low they shut down, and the ones in your camera may be degrading to the point it thinks voltage is lower than it is, and the difference between battery voltage and power supply voltage is where the trigger point now is. In which case, a new camera is the most practical solution.

As a [strikethrough]second[/strikethrough] third thought, if you can get to them, try burnishing the battery contacts in the camera and battery. Just be cause they look good does not mean they are.
 
I returned the battery for refund, suspecting that John is correct about inability of the battery to deliver the required amperage. It appears that Unipower does not offer that battery, my search did not find it. One of the chain battery stores told me that they think that battery is not made any more, they did not have any, and that any stock one finds may be old.
So my plan B is to find a plug that matches the the AC adapter input for the camera and wire it to a small 12 volt rechargeable battery for the belt or backpack. I could make the adapter, see if it works from a vehicle battery and if so, then find something smaller and lighter. Won't cost much to try.
Some say that Sony makes a good video camera for about $650 (gulp) and some like GoPro, but not everyone does.
The best of the VHS camcorders were over $1000 long ago. But I had a salary then.
 
Back
Top