C-2 mower tapered bearings crossover #'s

[Bob McCarty]

I'm rebuilding the spindle on a second C-2 mower and wondered if anybody had parts numbers for the tapered cone and bearing (two of each required for the rebuild). I can't read any #'s off the old ones.

 

[Slim140]

I can get them for you in the morning. I have some out of a spare spindle at work.

 

[Bob McCarty]

Thanks!

 

[tst]

Hi Bob, here are the IH #s on the Messicks site, the bearing crosses to a napa BRG 14136AA then crosses to UNSPSC: 31171516 then to this #
Timken

Mfr #: SET67TIM
UNSPSC #: 31171516

so if this info came out correct you need a Timken set 67 which contains
Bearing Cone & Cup HM88649 and HM88610 Timken bearing size is Bore=1.375", Length=1", Radius=0.093"
CUP-BRG.
take the HM #s and rock auto shows them about $16 for the race and bearing, lots cheaper than IH

Tim



IH #S
- replaces #54628H
ST991 $7.47 3-7 business days 1 to equal #54628H
 6
BEARING ASSY,34.92mm ID

- ASSY, cone
474017R91 $69.70

 

[Slim140]

Tim’s numbers are correct.
The bearings I have both have 14136A on it.
The race is 14276. Both timken.

 

[Bob McCarty]

Thanks, I'll get a pair ordered today.