Automotive Gasoline = 125,000 BTU/gal
Diesel = 138,700 BTU/gal
Ethanol = 84,600 BTU/gal
So, Indy, you can see that ethanol is a poorer fuel by a little more than 2/3, but supposedly, with net yields being a little different than actual BTU's, 2/3 is the operable figure when calculating.
You can calculate the E(whatever) blends from these figures.
As a side note, Ethanol increases octane, so, with E85 blends, the 15% gasoline they use has very few octane chains in it.
So, in order to use ethanol as a motor fuel, we not only need to produce it cheaply, we also need to produce 140% as much for the same money.
This is not something I attempt to hide, as the forum's biggest ethanol advocate, either, which is why I chose to provide a more-or-less complete answer to your question.
Ethanol has major issues, but they are not insurmountable....
Lister(oid) diesels are the most cost-effective method of converting diesel to useable energy. This is for various reasons, not the least of which is engine life, and low maintenance costs. There are more fuel efficient engines, but they are high-speed beasties, which produce high heat, and wear out rather quickly by comparasin. If one is going to produce energy from diesel on any sort of small scale, a lister(oid) is the way to go.
--Tom