Brake controller?

Hengy

501 Club
Hi all!

I have a Dodge Ram and need to install a brake controller to handle electric trailer brakes on a trailer. What kinds of controllers are you guys using? What would you recommend? Thanks for your help!!

Mike in La Crosse, WI
 
Don't waste your money on an after-market brake controller. Trade that Ram in on a new Ford and you can get a digital brake controller as a factory installed option in the dash. :lol:

If you insist on an after-market unit, I wouldn't get anything but a Tekonsha. http://www.tekonsha.com
 
John *.?-!.* cub owner":52guxgsa said:
I have been using a Tekonsha Prodigy in my Ranger and another in my f-150 and been very happy with them. They are proportional controllers, and have lifetime warranties.
I also use the Prodigy in my Ram. No issues, no problems. I bought my trailer just up the road from Redman's Cubfest in 2007 where you had Merlin for your first event. He carried a cheaper controller and the Prodigy. You get what you pay for. 8)
 
Same here - Tekonsha Prodigy and absolutely no problems and you'll find a wire bundle and plug behind the dash to make it a plug-in installation.
 
Agree with all the others, but especially with Vince :D I opted for the voyager from tekonshea in my half ton, and I really wish I would have went with prodigy. The F-350 came with the built in controller and it does not get any better than that. Works great.
 
I have a prodigy in my 250, its 7 years old and no problems. I am pretty sure any digital one will be fine. IMO.
 
I have the same digital controller in both my pick-up & motorhome. One is Draw Tite, the other is Reese, I'm not sure who they're actually made by, but they both work very well. I agree with sticking with a good digital controller.
 
Back
Top