Brace & Bits

Paul_NJ

501 Club
I'm going on a 10 person volunteer trip to Malawi, Africa next month for 2 weeks, and my project is to build swing sets out of wood timbers. There will be no electricity available, so all drilling and sawing will have to be by hand. I have a couple of my grandfather's old brace drills that are in good condition, so I thought I'd bring them. Problem is finding bits. I'm having a difficult time finding the old style tang based bits. (I need 7/16, 9/16, and 1 1/4). The ones I see on eBay are either $$$ collectors items, or the wrong sizes.

These braces have a two jaw chuck. Does anyone know if I can use the modern hex shaft auger bits in them?

Anyone want to come along to help?
 
Paul, my hat is off to you for this project. I do not think the jaws on a brace will clamp tight enough to hold a standard bit, but if you go to Mcmaster.com and search for wood boring bits you are looking for style B bits.
http://www.mcmaster.com/#wood-boring-drill-bits/=1vbrjb the ones they have are all long shanks (`17 inches) though.
In my part of the country the real hardware stores still stock them. By real I mean Ace, Tru-Value, etc. not Lowes or Home Depot. Before you go, get an old timer to show you how to sharpen them, and take a couple of the correct size files.
 
Thanks John. There's still a few ACE hardware stores around, although the ones I used to go to unfortunately closed in the past year or two. I'll call around.

I'm surprised no one ever developed an adapter to the newer hex shafted auger bits used in electric drills. I found these guys, but unfortunately the one that looks like it might work is a 1/2 hex, while all of the bits I have are 7/16 hex. So close!

http://www.leevalley.com/wood/page.aspx?c=1&cat=1,180,42337&p=32300&ap=1

swings plan s.jpg

swings.jpg
 
Paul: I have a couple of braces and quite a few bits, between 15 and 30 of them I think. There are a variety of diameters and lengths. I rarely use them and I keep them only because my father-in-law passed them on to me. I will be happy to make a loan of the bits. Contact me by pm if interested. Like EJP, I commend you on participating in a very worthwhile project. Dan
 
I need to rummage through my stuff. I have a couple of braces and some bits. Let me see what I've got before I make any promises.

Bits larger that 1 inch were the adjustable type - at least the ones I've seen.
 
Thanks guys. My neighbor reminded me tonight that the Jacktown tractor pull and flea market is this weekend, in Bangor, PA, which is about an hour away from me. I'm going to check that out Saturday morning. There's usually lot's of older tools there, so that might be the easiest opportunity to find what I need. But thanks again for your offers to help. I'll report back how I do.

Paul
 
Paul:

Surprisingly I still use my brace and bits a lot. They come in handy. I even have my old eggbeater as well that has come in handy in many places. I also have a few of the expansion bits that are ajustable to 1-1/8 and I think 1/-1/4. It has been a while since I have used them. I will check what I have and let you know. You are welcome to borrow them and it would be a privilege to send them along. The eggbeater style uses regular bits and some of them will take larger bits... but you would need reduced shanks for the larger sizes from 1/2" up.

The offers you already have are wonderful and a testament to the nature of our members. Help each other.. and by extension help anyone that needs help. Amazing and profuundly moving.

I admire the courage and dedication you have to be able to volunteer for a project such as this. This is something that I think is extremely important on a personal level as well as being an ambassador for your neighbours and your country. Well done :!:

Has it stopped raining yet?
 
These braces have a two jaw chuck. Does anyone know if I can use the modern hex shaft auger bits in them?
Couple of thoughts.

1) I just drilled a 1/2" hole in a 2 x 12 using the brace and a standard HSS straight shank drill bit.

2) Spade bit sets come with hex shafts and are quite inexpensive compared to larger HSS drill bits and probably wood auger bits. This is the way I would go, the spade bits. The larger twist drill bits really run into the money.

3) You could have your local machine shop mount a drill chuck on a square tang. This way you could use brace with a wood bit or one of the standard twist drills.
 
That sounds like a cool trip. Like the others have said. A good old fashioned hardware store should be the ticket. If they don't have it in stock they should be able to order what you need. My local TruValue store is always good about ordering stuff in for me. I just did a quick check on Lehman's website. They have a set by Irwin. Lehman's is always on the pricey side.

Drill Brace Bit Set
Classic carpenter's set of 13 auger bits. Screw tips bite into any wood. Sixteenth inch increments from 1/4" to 1" (sizes 4 to 16). Bits from 7 3/4"L to 9 1/2"L. Made in Brazil.

http://www.lehmans.com/store/Tools_...erjacking___Drill_Brace_Bit_Set___43699?Args=

I still use the old bit and brace on occasion. They come in handy.

Doug
 
Back
Top