Bought a John Deere L at auction

cjet69

501 Club
The auction was 2 weeks ago, and Friday was the pick-up day. Had the winning bid on this 1940 John Deere L project tractor. About the only thing missing is the Carb. This has the Hercules NXB engine.

GOPR4249-m.jpgGOPR4250-m.jpgGOPR4251-m.jpgGOPR4252-m.jpg
 
Pumped up the tires, turned the rear wheels around to narrow up the tread, and got it unloaded Saturday.

GOPR4255-m.jpgGOPR4257-m.jpgGOPR4259-m.jpgGOPR4260-m.jpgGOPR4263-m.jpg
 
Yesterday I touched up the points in the mag and now have good spark. Pulled the plugs and looked in the cylinders. I think the PO must have had this opened up because it is really clean inside. Also found it has .020 oversized pistons when I ran the borescope into the cylinders.

100_5652-m.jpg100_5653-m.jpgPHO00000.JPGPHO00001.JPG
 
Thank you and it will be very interesting to watch your progress with the project. Some of us have some green sprouting in the sheds!
 
ajhbike":3n5mryja said:
Thank you and it will be very interesting to watch your progress with the project. Some of us have some green sprouting in the sheds!
It will probably be a while before I do much to this one but I may try to get a carb on the engine and see if its a runner.

ricky racer":3n5mryja said:
A John Deere Model L kit! I love it! :{_}:

Some assembly required. Instructions...... who needs instructions?????
 
Got the engine set back in the frame. Found some round rod and bent up a hand crank. Just need to drill for the cross pin. Going to try and start it soon.

100_5661-m.jpg100_5662-m.jpg100_5663-m.jpg
 
Played around with the L some today. Need to check the valves because its not sucking thru the carb like it should when I crank it over.
 
pour gas in the plug holes to prime the motor,--should fire then, got a 420c loader here that I gotta do that to if it sits more than a week.
 
Back
Top