Boeing 747 turns 40

I was working for McDonnell Douglas when Boeing released the 747. It hardly seems possible that it was 40 years ago.
 
The reason I like flying in air planes.

At work our gas turbines are bolted to the ground and used to spin a generator. What is amazing is that with a frame 7fA machine 60% of the power it makes is used to run the compressor (17 stage) It takes 8 MW to use the generator as a starting motor to get it up to 3200RPM when the turbine finally produces enough power to run its self........Just got hom from work after washing and starting one up. To sit on a plane and feel the power on take off kinda turns me on.
Robert (tired of working graves) MIller
 
Robert - I get that feeling every time I take a commercial flight. When they turn that thing loose at the beginning of the runway I can't describe the awsome respect for the power of those turbines. :D :D :D
 
Happy Birthday 747! Turbine engines are impressive! Prat & Whitney had an old slogan That said In Thrust We Trust! That about sums it up! I deal with the flying ones, but I have always been fascinated with the industrial turbines. They run at high power settings practically non stop. A true testament to their durability. The only way it could get better is if they were all Cub engines! :D
 
The 747 is a great plane and extremely versatile. We got to see this in person when the pair stopped at Lambert Field in St. Louis some years ago. We stayed and watched it take off. The 747 used every inch of the 11,019 ft runway. It was one of the most awesome things I have seen. When the pilot cleared the fence at the east end of the runway the entire crowd watching broke into applause and cheers. What a plane. :D :D :D
747.jpg
 
I love the takeoffs when you feel it push you back into your seat :D John Wayne Airport is good for that in Orange County Ca. Short runway with a highway at either end. When they take off from there it feels like they rev it up with the brakes on until the plane starts jumping then off you go. This last trip I flew in and out of Burbank and was in a CRJ 200 or 300. Felt like a little sports car when it took off. I have traveled on our corporate jets and they have a nose camera that allows you to have the pilots view of the takeoff and landings. That is pretty cool.

In '06 when we went to China we flew China Air 747's. 13 hour flight from LAX to Beijing. Really a nice ride. What amazes me is how fast they can load and unload passengers. Seems like it the process was much faster than other planes.

Doug
 
Bigdog":1bxufavf said:
When they turn that thing loose at the beginning of the runway I can't describe the awsome respect for the power of those turbines. :D :D :D
I know the B-52 doesn't have near the thrust as a 747, but to sit on one with all 8 enignes to power (TRT) will make your heart skip a beat!! The thing will rock around and shake so bad it is hard to read the instruments, and forget about hearing anything except the screaming of the engines. An amazing feeling.
The engines of the 747 were tested on the B-52 because it was the only aircraft large enough at the time to carry them!

The DC-9 has a skid plate at the rear of the fuselage that prevents the tail from dragging during takeoff and landing. Also a trip latch that will let ground personel know if it scraped, lots of inspections to do if it did!! Other aircraft may have this type of indicator as well.
 
Screwstick":jkobkewm said:
I know the B-52 doesn't have near the thrust as a 747, but to sit on one with all 8 enignes to power (TRT) will make your heart skip a beat!!
But the 747 doesn't have 8 engines either! Nor is it Stage 3 compliant.....which is even better! :D
 
Carm":2dh5z21p said:
But the 747 doesn't have 8 engines either! Nor is it Stage 3 compliant.....which is even better! :D
Gotta love the noise of the old jet engines without the stage 3 hush kits on them :{_}:
 
Screwstick":1qkh8nrv said:
Bigdog":1qkh8nrv said:
When they turn that thing loose at the beginning of the runway I can't describe the awsome respect for the power of those turbines. :D :D :D
I know the B-52 doesn't have near the thrust as a 747, but to sit on one with all 8 enignes to power (TRT) will make your heart skip a beat!! The thing will rock around and shake so bad it is hard to read the instruments, and forget about hearing anything except the screaming of the engines. An amazing feeling.
The engines of the 747 were tested on the B-52 because it was the only aircraft large enough at the time to carry them!

The DC-9 has a skid plate at the rear of the fuselage that prevents the tail from dragging during takeoff and landing. Also a trip latch that will let ground personel know if it scraped, lots of inspections to do if it did!! Other aircraft may have this type of indicator as well.

I can understand that.....At work you can walk in and stand under the turbine while it running 1 foot above your head.....screaming seams to be an understatement. Our steam turbine puts out 265 MW. You can lean your back up against the generator and get a 60 HZ back massage.......That can't be good for the body......
Robert
 
I left work early tonight......being on graves tear me up pretty bad. We just finished a 12 million dollar major on a gas turbine. The thrust bearing clearance was set to 17 mils.....vibs shut it down on green rotor run in at FSNL. (supposed to be 4 hr run) I learned alot about shaft axial movement that happens before you lock in in as the generator starts producing power. They are taking the bearing back apart to reset the clearance to 11 mils. We never set at FSNL normally for more than 1 minute. To us the gas turbine is only a heat sourse for the boiler.....and the electricity is a added bonus......FSNL is full speed no load for the non power plant people.
Robert (runs 450,000 HP turbines) Miller
 
1541":migwxewk said:
I love the takeoffs when you feel it push you back into your seat :D John Wayne Airport is good for that in Orange County Ca. Short runway with a highway at either end. When they take off from there it feels like they rev it up with the brakes on until the plane starts jumping then off you go.
Been out of that one too, but the Ohare takeoff was more memorable. Maybe because it was the first time riding out from a short runway.
 
The thrust bearing clearance was set to 17 mils.....vibs shut it down on green rotor run in at FSNL. (supposed to be 4 hr run) I learned alot about shaft axial movement that happens before you lock in in as the generator starts producing power. They are taking the bearing back apart to reset the clearance to 11 mils.

That's why I was suprised to see the outdoor assembly. Seems like I've seen a/c turbine assembly done indoors by folks dressed like surgeons. However they do it......seems to work. :{_}:
 
but the Ohare takeoff was more memorable. Maybe because it was the first time riding out from a short runway.

Hmmm......Chicago Midway makes John Wayne a cake walk. No Concrete barriers at the end. :cry:
 
Some of these posts brought back a memory of many years ago. I had an Uncle that worked at the McDonnedl Douglas plant at Lambert airport in St. Louis many years ago. Then the area surrounding the airport was not nearly as heavily populated as it is now. They ran jet engines on an outdoor test stand with the exhaust aimed at a barrier about a hundred yards away, I guess that was for noise abatement. When they ran one in very cold weather a pheasant would come out of the woods and stand in front of that barrier warming up. The pheasant would stand there turning around every so often as long as the engine ran, and once they shut it down would disappear till they started one up another day. Since pheasants are not native to that immediate area I assume it was someone nearby's pet.
 
Back
Top