Beaware of that 4" hand grinder !!!!!!!!!!

BigBill

501 Club
I had an accident the other day and i'll admit it. I was using a 4" hand grinder and needed an extention cord but was tool lazy/tired to get one. I kept on pulling the plug out of the socket and the grinder was in the on position, the on/off switch is locked on and stays on when its unplugged. I plugged it back in 2 times and it started right up and missed me as it flew around. The 3rd time it bit me with the 4" wire cup coarse wheel in my arm. I got a tatto/rug burn really bad and if it went any deeper I would of been in trouble too.

It was the end of the day, I was tired and in a hurry to get it done before i stopped working. This is the worst time to take chances and do stupid things.

My point is becareful of that 4" hand grinder and that switch when its locked on and you unplug it.
 
Bigbill

Try holding on to a 4-1/2 inch grinder while it it chewing the crutch out of you coveralls ,and trying to disconnect it with your feet BEFORE it eats your best friend from betwen your legs. LOL .I still use the same coveralls. 8) :lol: :oops: Bruce
 
one of those tore my dad's shirt up pretty bad, and in the process gave him a mean purple nurple :D They can be a tad bit dangerous for sure!
 
Bruce: Looks like a few dollars for a metal cup would be money well-spent when using a wire brush on a grinder.LOL I have never had an accident but it would sure mangle an arm or leg in a hurry. Dan
 
Guys:

Don't feel too bad. Accidents happen, and they always happen when you least expect it, such as those times you are in a rush or you mind is somewhere else. Ask me :!: :oops: :roll: :cry: I do know. I spent almost 40 years without a serious injury working with all kinds of tools and of course weapons in the military. I prided myself on being safe, safety conscious and keeping my mind on what I was doing.

In time though we can become complacent, because we have worked for so many years safely, that we start to take shortcuts.. BTDT.. and yup it hurts. Thankfully I still have all of my parts that I was born with.. not in exactly the same shape of course, but I still have em.. even after a couple of pretty serious accidents.

I thank the Lord that he brought me through them, and I am glad the Lord brought you all through those various moments of inattentiveness safely.
 
Accidents do happen I agree. I ended up with a wire from the wire wheel in the corner of my eye one day. All I done was picked it up and made sure it was plugged up ad working, boy, never again :D
 
As a retired Safety manager, I have to disagree. Accidents do not happen, they are caused. They are caused because we tend to take short cuts; becaused we don't wear safety gear such as safety glasses/goggles/face shields; because we get in a hurry; because we use try to use a tool for other than it's intended purpose, etc, etc, etc. I've been working on my wifes Lo-Boy all day, but you will have to excuse me while I go get another band-aid............ :)
 
spiveyman":3oiak11s said:
one of those tore my dad's shirt up pretty bad...

I beleive something similar to this happened to my dad once, also. clsest i've came to this was when I got a shirt sleve caught in a dremel tool. No harm, though.
 
Most of my accidents seem to happen when i'm in a hurry at the end of the day when i'm tired to just get it done.

I had a 4" wire cup also grab my brand new awesome wollen shirt and tear it up about an 10" cut. It was a heavy duty shirt and i was lucky it was the shirt and not me. This grinders are really mean and can do some damage really quickly too so becareful when using them use extra caution about shirt sleeves and unbuttoned shirts near them too. Your holding the grinder when it wraps up into the shirt and all you can do is watch it while it eats up your shirt and lets hope its not your skin too.

Be aware of the wires too. I was pulling the wires out of my skin that were stuck in like arrows I had a few so i couldn't take my tee shirt off it was tacked on by them. (ouch) Alll I can say is to use a quality wire wheel....the cheap ones send little arrows at us.

I'm don't want to imagine that cup brush headed towards my crotch I seen what it did to my arm.
 
A guy I work with came into work looking a little fettered one day. I asked him what happened and he gave me this answer:

"We were loading steer to take to auction when the last one in the trailer kicked me in the leg knocking me backwards against the hot wire fence. The shock sent me forward face first onto the ground and broke a tooth. When I got to the dentist office he was busy with another emergency so I had to wait four hours with a broken tooth and a sore leg before he saw me."

He's a smarter man today when it comes to moving livestock.
 
I've got several 4 1/2" grinders in the shop so I can leave them setup, wire brush, grinder, cut-off blade, etc. I reserve the cheapest motor for wire brushing and save the Metabo for the cut-off wheel. But I think that is about to change.

I was overhauling a Logan lathe and wire brushing away 50 years of accumulated dirt/grease/grime. And it was the classic setup. Late in the day, tired, leaning forward to get the last little bit. And suddenly I was wire brushing my T-shirt. And I do mean suddenly, a grinder with a wire brush is as quick as a snake. A mean, bad-tempered, rattlesnake. I had a serious case of road rash from navel to nipple, and a new healthy respect for the grinder.

The point to all this? The cheap grinder has a lock-on switch and no clutch. A dead man switch would be a better arrangement, and a clutch would be even better. The expensive Metabo grinder has a clutch and I may do an experiment to see what effect the clutch has when tied up in a T-shirt. Not MY T-shirt. I figured I'd staple a T-shirt to a fence post and get the wire brush tangled up in it. If the clutch prevents the T-shirt from getting wrapped too tightly, I may make the Metabo the wire brush grinder.

Rick (Shade Tree Science is everywhere) Dulas
 
I just bought a new 4 1/2 inch grinder to use on wire brush, and my old one is doing grinder duty only now. You can lock the new one on , but I do not use it that way. I was wire brushing some 5 spoke trailer wheels with it, using both hands on the grinder (rear grip is a long handle), when the brush caught, jerking the grinder out of my hands and bouncing it off the wall of the new shed. WOW
 
Bruce Sanford":bx53ga05 said:
Bigbill

Try holding on to a 4-1/2 inch grinder while it it chewing the crutch out of you coveralls ,and trying to disconnect it with your feet BEFORE it eats your best friend from betwen your legs. LOL .I still use the same coveralls. 8) :lol: :oops: Bruce
Thank God you saved the family jewels :roll: :oops: :lol: :lol:
 
That a accident waiting to happen. I did the same thing and disconnected the plug. I took the lockon off the grinner. safer for me :D
 
cub629XX":2wfb6xj1 said:
That a accident waiting to happen. I did the same thing and disconnected the plug. I took the lockon off the grinner. safer for me :D
I have thought about that, but some of the older grinders are almost impossible to use without the lock.
 
Back
Top