Barn Find Chevy

Actually I finished the differential before the engine, but when you have limited shop space as I do, I want all the components on the chassis completed when I roll it out to storage and bring the body in. I get your drift on the LS4, "help". :roll: The car will be street legal......but more in the manor of a Baldwin Motion car 8)
 
:shock: :{_}: :shock: . that is a MO-sheen . Mr. H , looks like a project to be proud of , coppersmythe....................(loboy's still strong , did put petronix ign in though )
 
bibbster":3v3dj5no said:
How goes the project, Harold?

He gonna have to tighten up a little bit and keep us better informed! :-). I popped over to his place a few weeks ago for a cub express, looked to me like it's going to be one fine job.
 
I'll be updating soon. The motor is alive and I have a rolling chassis. I am about a third of the way into the body work. I get side tracked from time to time, but I try not to let dust settle on this project. I enjoy it too much. :-)
 
Here's the rolling chassis. I still have to run the exhaust, shift module vacuum line on the transmission, and fix a leak on the steering ram. Probably one good day's work.


Here's the engine. Factory as a LS4. But rebuilt with domed Pistons, better cam and intake. Stayed with the factory heads but had them ported and larger exhaust valves. Roller tip rockers and double timing chain. Rebuilt the stock quadrajet carb. And it stayed within budget. :-:-): It sound pretty raucous.....so no more test fires until the exhaust is on.

Totally new rear suspension. Single fiberglass lead but with dual mounts. Bilstein<sp> shocks, stock differential, went through it completely.

As far as the body, been going at it at fair pace. By far the more arduous task of rebuild. Most all of the multiple layers of paint have been removed, one small repair made to the tub area behind the seats. The front clip was sagging so I shored that up with new rivets and some fiberglass. I've just started work on the metal cage around passenger compartment. No rust throughs thank goodness, but a fair amount of surface rust to remove. It's a lengthy process for sure......But I do enjoy it.
Back to the tractors though once it's done. :lol:
 
Back
Top