Banging Trailer Brakes

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
I've got a problem with my new dump trailer. Everytime I let off the brake pedal it feels as if someone has just run into me at about 40mph. Its a severe bang that occurs regardless of controller setting. I've checked all the obvious such as good grounding and with a meter actuall voltage at the brakes during brake applied and release. Nothing appears wrong. My trailer was pulled with another vehicle with a different controller and all was fine so I know it is a problem with my controller. My other trailer doesn't have this issue. Anyone ever experience this? I thought it was maybe a voltage spike occurring at release but the meter shows nothing. However if I'm on the brakes and I turn off power to the controller no bang occurrs. I'm real close to just getting another controller.
 
Sounds like you need a brake resistor in the line between the controller and the actual brakes. That was quite a common problem 20 yrs. ago, but I thought the newer style controllers all had built in voltage compensation. Frank
 
If you have a hot lead in plug to trailer for charging break away battery operating lift pump, etc. try disconnecting that. If it helps double check wiring in trailer plug for stray strands, loose ground, etc. If you are using the 6 pole plug rather than larger 7 pole, there are 2 different common wiring plans. the hot wire and brake control leads are swapped in them.
 
John wrote
If you have a hot lead in plug to trailer for charging break away battery operating lift pump, etc. try disconnecting that. If it helps double check wiring in trailer plug for stray strands, loose ground, etc. If you are using the 6 pole plug rather than larger 7 pole, there are 2 different common wiring plans. the hot wire and brake control leads are swapped in them.

Amazing how you can rember something like this. When you have a problem :!: Like when I just borrowed a trailer I herd something buzzing under the dash Then 800' feet down the road the trailer breaks lock up :shock: Had to unplug the the trailer to get it home. I have to go and pick up a 11,000 lb hilo for my brother 80 miles away and bring it back. I kinda need to figure out how to fix it so I have breaks :!:

John do you know which wires I have to swap :?:

Thanks
Billy
 
Check you constant hot wire, then disconnect it on the truck plug and the trailer plug. All of the plugs are suppose to be standard. Well they are a standard size after that, only GOD knows how they hooked it up. I see this problem once a month at the fire house where I work. Get a test light and diagram your truck plug, then make the trailer work. It is probably in the plug and can save you money on the controller.
 
Thanks John and Smigelski

I will try to make a adapter plug. I should have checked all the wiring on the truck as the plug was moved inside the truck box. But I didn't think I was going to use it untill spring and was waiting for warmer weather.

Billy
 
I only pulled one of my trailers with the Grand Cherokee one time. I had to do it without the brakes or lights because the hot and brake are swapped. Maybe some day I'll swap them around as they should be. I use both trailers with the pickup and motorhome so it's the Jeep that has to change.

I have 6 pole plugs. It will be the "S" AND "A" terminals that I swap.
 
Thanks Gorge

Pulling a 5000 lb trailer
With a 10000 lb forklift on it
Being able to stop
Priceless

Billy
 
Back
Top