At Least I Can Work On This One

Merlin

501 Club
The fruits of my trip to Texas on my $300.00 trailer.
normal_1955%20Plumouth%20April%202006%20003.JPG
 
I guess it was just before they skipped '58 and '59 and came up with the " '60 new model"?

Are there any of the '57 model in the southland that didn't self destruct after a couple years?
 
George - my aunt had a 57 Plymouth that she drove for years. Probably never got over 35 or 40 mph. Drove all the locals crazy when she made the 6 mile drive to town. The car was garaged all it's life and had regular maintenance. I don't remember when she got rid of it but I didn't get a chance at it.
 
Pictures can be very deceiving. It runs ok but needs a carb. kit and everything on it works but the way it was described was, when you look at it, you can't see a place that isn't rusted, bad bondo, dented, or don't have a hole. That is a very good description, but it can be driven while the body work is going on. There are a lot of old cars around here, but I don't know of any Plymouths and the prices are pretty high too. I got this one off e-bay.
 
Merlin":34f8skw6 said:
Pictures can be very deceiving. It runs ok but needs a carb. kit and everything on it works but the way it was described was, when you look at it, you can't see a place that isn't rusted, bad bondo, dented, or don't have a hole. That is a very good description, but it can be driven while the body work is going on. There are a lot of old cars around here, but I don't know of any Plymouths and the prices are pretty high too. I got this one off e-bay.

I'm way up here in Ohio. It looks pretty good from here.
 
Man, $300 trailers, $300 working cubs with mowers, i think i need to take a trip to down south, look for an additional trailer and couple of cubs just to bring all up north to resale to make money :wink: :wink: :wink:

Nice new toy to your collection
 
Merlin,

The ’55 Plymouth, (as for as I know) had an in line six flat head engine which was 230 cid, 117 horsepower one (throat) barrel carburetor.

The V8 was available in two displacement and three horsepower ranges. The 157 hp engine was of 241 cubic inches, while a 260 cubic inch engine produced 167 horsepower, and later, a mid-year addition of a power package (four-barrel carburetor and dual exhaust) increased the 260 to 177 horsepower.

The Plaza came with only a six cylinder engine.

P.S. I know the ’55 Plymouth very well; it was my first car I owned when I was a teenager about a hundred years ago. :lol:
I removed the original 241 cubic inches engine and put a ’59 Chrysler 391 Hemi in its place along with the transmission… I wish I had it back.

The old Chrysler products are bringing top dollar now. You have a good find.
 
Jack, this is the flathead 6 230 Cid and it has working power steering. Not sure if it is a add on or not though. The pump is bolted to the engine with the braces but it is ran off the generator shaft in the rear of the generator. Another thing is, there is no "Park" gear for the transmission. It has from top to bottom: Neutral, Drive, Low, and Reverse, with the lever coming out of the dash. The emergency brake works good, but if it didn't I guess one would have to build chocks for the wheels on hill sides and take someone with you to jump out and chock it. I'm going to have to get some books on it soon.
normal_16_12.jpg
 
Merlin, does trat one have the parking brake on the rear wheels, or does it still have the one on the driveshaft? if it is the one on the drive shaft, carry some chocks for changing a rear tire on a hill.
 
I can’t find anything Merlin; I know that is the way the gear shifter set up was. The power steering I’m not sure. Power steering was an option and probably that is the way it was set up. If I can remember the parking brake was on the tail shaft of the transmission. Do what John said about changing the tire on a hill.
 
This is the one I almost bought because it's less than 100 yards from my house, but I didn't because it needs a windshield and I couldn't find one.



normal_1959%20Lincoln%2016.JPG
 
Back
Top