D.Nickerson
Well-known member
I posted a picture of a Cat bucket I welded on awhile ago. Well this isn't the machine, but I found this picture from about '97 or '98. At that time the picture was taken, this was the second biggest Cat hydraulic excavator in the world. 8)
This was taken up in Blossburg PA. This was a brand new machine they hauled in from the Cat plant. They were extending the RT. 15 bypass. Darn near the whole project was on the side of a mountain. :shock: When I walked under this machine, I could see the main hydraulic lines coming from the pump. They were about 6" in diameter. :shock: :shock: And as you can see, I didn't have to bend over far to walk under it, and I'm 6' tall. I remember seeing the tag on the bucket, it alone weighed 25,000 lbs. I don't remember the cubic yards though. Each tooth had a hook welded on it for putting it on. I'm guessing each tooth weighed about 600-800 lbs. At that time I had a GMC 3/4 ton turbo diesel, half of the truck would have fit into the bucket.
And for tose of you that know machines like this, if you notice the boom cylinders are inverted. They say they can get more power out of them that way.
Behind the excavator is a 777D quarry truck. There were 3 more besides that one. All BRAND new. Little bit of money there!!!!! I'd like to have what they all cost!!!!!
I sure wish I could've operated that machine!! 8)
As you can tell, I looked alot different back then. My beard was down past my shoulders, and so was my hair. My cowboy hat is covering my hair, so you really can't see it.
Maybe someone on this forum from around that area could add more to this post about it.
This was taken up in Blossburg PA. This was a brand new machine they hauled in from the Cat plant. They were extending the RT. 15 bypass. Darn near the whole project was on the side of a mountain. :shock: When I walked under this machine, I could see the main hydraulic lines coming from the pump. They were about 6" in diameter. :shock: :shock: And as you can see, I didn't have to bend over far to walk under it, and I'm 6' tall. I remember seeing the tag on the bucket, it alone weighed 25,000 lbs. I don't remember the cubic yards though. Each tooth had a hook welded on it for putting it on. I'm guessing each tooth weighed about 600-800 lbs. At that time I had a GMC 3/4 ton turbo diesel, half of the truck would have fit into the bucket.
And for tose of you that know machines like this, if you notice the boom cylinders are inverted. They say they can get more power out of them that way.
Behind the excavator is a 777D quarry truck. There were 3 more besides that one. All BRAND new. Little bit of money there!!!!! I'd like to have what they all cost!!!!!
As you can tell, I looked alot different back then. My beard was down past my shoulders, and so was my hair. My cowboy hat is covering my hair, so you really can't see it.
Maybe someone on this forum from around that area could add more to this post about it.