Air lines in shop Kit

Jeff Silvey

501 Club
Has anyone ever used this kind of stuff for air lines in their shops. This is from Harbor Freight.
Thanks
66747.gif


Complete Garage Air Kit


This complete, airtight compressed air distribution system is designed to be easily installed using instant fittings to join and automatically seal for a more efficient workspace with a professional race-team look.


Compressed air can be made available instantly and easily with no special tools, solder, gluing or threading, making this flexible kit ideal for home garages or repair shops and sheds
Allows for ceiling, wall or other creatively hidden mounting possibilities
High tech fittings work by simply pushing the tubing firmly into the fitting to seal, and pushing in evenly on outer release ring to detach and pull tubing out of fitting
Installs in as little as a few hours, depending on total system complexity

Contents: (1) aluminum compressor manifold, (2) aluminum air outlet manifolds, (6) 3/8" NPT push fittings, (4) 90° elbows, (2) hand ball valves, (2) 1/4" NPT brass unions, (2) 1/4" NPT brass nipples with 45° elbows, (3) 3/8" NPT brass plugs, (2) tee fittings, (1) 100 ft. nylon tube, (1) tube cutter. Maximum pressure: 150 PSI



ITEM 66747-2VGA
 
Jeff,
I have not seen one of these kits but I just changed out my hot water heater that I originally plumbed in with solid copper lines. I used fitting
just like the last picture. All you had to do was cut the copper tubing slip the fitting on and it sealed its self. I belive the stuff in the pictures is like what they are using in mobile homes for water lines.
 
Looks like it could be a pretty handy setup. The fittings and hose appear to be much the same as the PEX tubing used in mobile homes, and in some houses now. I have heard of a lot of people using it in their air lines. One thing they tend to gloss over, is that I believe those fittings require a special tool to release them for reuse. It can be done without the tool, but kind of difficult.

If I were building my shop now I might put one of those kits in, but in it's present condition it would take several days due to moving stuff to get to the walls. :lol: I do most of my work at one end of the shop, and mounted a 50' self retracting hose reel about 7' high beside the door on that end. The hose is long enough to reach anywhere in the shop, and when I am done I just give a tug and it rewinds on it's own. Not exactly like this one, but similar.

05230.gif


http://www.harborfreight.com/cpi/ctaf/d ... umber=5230
 
3/8 is pretty small if you are making a long run. I used 1/2 inch copper and someday when time allows it will be redone with 3/4 inch pipe. The CFM loss is significant if you are using big air tools or trying to sandblast. If your requirements are not high it will make a quick and neat install.
 
General idea of my setup.
I chose type k copper , 10' lengths and soldered , for the air line system in my shop. It cost approx. 250 to run 70 ft. with 5 outlet drops and shut off valves on each. I had some of the fittings on hand which helped with $$ . Up from the compressor above the joists and drops down to approx 4 ft off of the floor. This has worked out well and I have confiedence it wil last a very long time , and should not become schrapnel if hit or damaged . I consider it money well spent if one is looking for a permanent solution. :D

Beaconilght brings up a good point on type m copper, home depot cheapest. It is very thin and wont cost you that much less for the project than L that they sell. Cost approx L= $13.per 10' M= $ 9. per 10'
 
DanR":e3da9u7o said:
If this kit is kin to the rest of HF's air products it's JUNK. Just my opinion.
I have bought and used Harbor Freight tools, etc. on occasion for many years. They are not a quality I would want if making my living with them, but for the hobbyist or homeowner, they do good, especially for the price paid.
 
John *.?-!.* cub owner":31fh3fku said:
DanR":31fh3fku said:
If this kit is kin to the rest of HF's air products it's JUNK. Just my opinion.
I have bought and used Harbor Freight tools, etc. on occasion for many years. They are not a quality I would want if making my living with them, but for the hobbyist or homeowner, they do good, especially for the price paid.

My experience with HF is as John's . I have bought a lot of goods from them over the years. Their tools are not the best you can buy but i feel well worth their cost. In my experiences anyway. :D
 
All my compressed air is delivered via sch 40 PVC. Works as slick as owl snot.
1 inch for main lines and 3/4 for branches.
Its rated as 175 lbs.

Never has a leak or blowout.

And it is very economical and easy to work with.
 
I had some sch 40 PVC lines in my barn. Part of it became brittle with age. I think it was caused by oil. Air from a compressor always has some oil. I eliminated all of it.
 
The idea is good, many companies sell a professional version of the same thing, but with larger diameter tubing and bigger unions etc.

With that kid you are going to be locked in, if stuff fails the whole thing is done. If it leaks its done. And I don't believe Harbor Freight warranties things like air hose.

If you want flexible tube. Measure from the "manifold" to where you want your couplers, work bench, garage door, wherever. FIgure out the lengths of the runs. You can get airhoses in different lengths for very little money, last harbor freight sales flyer I looked at had 25' airhoses for something like 5 bucks, so 20 bucks gets you the same 100 feet. Instead of 100$, add in another say 50 bucks, and you can have ball valves, T fittings, quick connects etc. And if you have a leak of any variety, or need to expand you can get the parts easy. You can always cut the air hoses, put a T coupler in with hose clamps anywhere you want.

Might not be quite so slick, but if anything goes wrong you've got the ability to make repairs, add new stuff in. And it would be less money. Full price 1/2" airhose is 10$/25 feet, that's 40 cents a foot. You can't buy bulk 1/2" airhose for that. And that's 200 PSI rated instead of 150 PSI like that kit.
 
Back
Top