air compressor upgrade

ReTractor

Well-known member
I'm thinking about upgrading my air compressor. Just starting to do my homework. Right now I've got a little 2 hp, 6 gallon 2.6 cfm unit. I'm looking to go to maybe a 20-30 gallon unit. I know that plenty of folks on the forum have air compressors. Any advice or comments on particular brands, size, function, experience would be appreciated. Whatever I buy I plan on having it for a good number of years. I saw what looked like a decent DeWalt unit at Home Depot the other day but like I said I'm just starting to look.
 
Many years ago I bought a 30 gallon Speedaire from WW Grainger and it has worked well. I especially like the availability of parts 24/7. :D
 
thanks for reminding me to check out Graingers. I completely forgot about them. You are right they have a good product and they will be around when you need them.
 
One thing you need to take into account is what you will use it for. You'll want to make sure that the PSI and CFM are adequate for your needs. For example, a sandblaster needs a lot of air. If your air compressor is inadequate, the compressor will run constantly or you'll wait for pressure to build up.

Bob
 
I just hook a hose up to a sparkplug hole on the cub and run it full throttle....max air pressure around 110 psig...these cubs run pretty good on three cylinders....ok I'm just kidding...I have a craftsman 30 gallon upright....for airing up tires its perfect....I dont think it could keep up with the stuff Yogie does.
Robert (participating as much as I can) Miller
 
I have been shopping for a compressor for a couple of years.... I want one big enough to run at least a small sandblast cabinet.

They seem to come in two sizes, too small and big enough. Pretty much for any real work you need a 220v one.

I am pretty leery of anything from Home Depot, regardless of the brand name on it (they sometimes force manufacturers to make a 'cheaper' version for them). Grainger sells quality stuff, I have an antique SpeedAire that runs well. Tractor Supply has a pretty good selection. Also, local tool stores will sell quality brands and may even have trade-ins. Don't overlook used ones, craigslist, etc can be a good place to look too.... but the usual 'buyer beware' applies.
 
Like any major investment... you really need to decide what you want the compressor to do. Sand blast, painting, running air tools... and do you just want to be able to run one tool at a time or more than one. Also what kind of cycle time do you want... the larger the tank the longer between cycles.

One of the most overlooked places to buy a compressor is a commercial compressor shop. THey usually have some really good deals on high end compressors/commercial compressors such as those used in automotive shops, paint shops, fabrication plants etc.... A 100 gallon lay down is a nice sized tank, and even a 60 - 100 gallon upright will fit in smaller places. You might be surprised at what you can save. On top of that, a commercial compressor usually runs on 220 which will reduce your electric bill. I have had my DeVillBliss for over 22 years now and it was the best buy I ever made. Make sure you get the electrics with it.

Your small 2hp compressor is good for inflating tires I guess and could be used also for some small air tools, but the cycle times are going to be murder. A 20-30 gallon tank is going to be better, but not a whole lot. The cycle times when running say an air sander will be much higher than a 100 gallon tank, with an air ratchet or impact wrench same thing. The more often the compressor runs the harder on the individual components. Think about what you want to accomplish then investigate which type would be best for you.
 
You want to get the best "two stage" compressor you can afford!! You can get 60 gal single stage compressor which won't
give you the cfms or pressure you probably want. A lot depends what you want to do with it.
John
 
Thanks for the feedback. I do have a larger restoration project (1986 CJ7) if I ever get it started that will need sandblasting, painting, air tools and whatever else a higher cfm, bigger tank could do for me. Still not sure if that is complete justification, but we'll see. I will be checking the used listings on Craigslist and other sources too. I like nothing better than a good deal if I can find one. As I've gotten more mature (old) I'm not as impulsive as I used to be. Used to be I would buy the first thing I saw cause I liked the color or whatever. Now I do spend a little time checking things out first. That's what I"m doing here and I appreciate your comments.
 
I did the upgrade thing back in 2001. Like Rudi said, I shopped around and ended up buying mine from a commercial compressor place. Best bang for my buck.

I ended up with a Curtis, 7 1/2 HP, 80 gal tank, 2-stage with 24 cfm @175 lbs. For pressure blasting that is about the smallest I would go with otherwise they just keep on running trying to keep up.

So far I have almost 50 hrs on the hour meter and just love it.
 
Back
Top