A question for the electrical gurus...

When an AC motor reaches it's operating speed, it produces back EMF, or sometimes it is called reverse EMF that opposes the current flow and reduces the power consumption.
Does a brush type DC motor with a permanent magnet field do a similar thign at certain speeds?
 
I took that class in 1963. The answer is that when the DC motor/generator is working there is a counter EMF. Counter EMF is there at all motor/generator speeds.
 
Yes - the DC motor does the same thing. A free-running (no load) motor will draw very little current because of the back emf generated. The more the applied load - the more the current draw.
 
Electro Magnetic Field. When electricity is introduced to a motor, a magnetic field in created around the stator (windings), which causes the rotor (shaft) to turn. When a load is applied to the motor, the magnetic field wants to collapse and the motor will draw more current to keep the field intact and operating at the same speed, until the load is more that the motor can handle and it burns up from too much current.
 
In this case I was referring to electro motive force, which basically is current and voltage. In an AC motor, when the rotor reaches the design speed of the motor the collapsing and building magnetic fields of the field windings and rotor produce the counter EMF that reduces current. Since a permanent magnet DC motor does not have collapsing fields in the field coils I was wondering how this worked in it. Does it reach maximum at a certain speed, or is it pretty constant?
What brought this to mind is my handicap scooter. I have been noticing that the batteries last about the same length of time if I use it just creeping along, as when I run it full speed, but of course I cover more distance at full speed.
 
http://www.tpub.com/neets/book5/16a.htm

There are a number of methods of wiring the fields in DC motors and generators. Generally the flow/direction through wire wound fields do not change in DC motors or generators and the fields function like permanent magnet fields.

I really don't know how your scooter's electric motor is wired/engineered. I think the answer to the question may be related to the amount of torque required to operate the scooter at very slow speed.

You might inquire with the manufacturer for their motor specs.
 
Kinda surprised some of the electrical engineers haven't posted on this topic.

I think the short battery life at very slow ground speed is related to the amount of torque/higher amperage required to initially start a motor.
 
Back
Top