John(videodoc)
501 Club
As i have mentioned before we lost my father last spring to lung cancer. Being a vet he was buried with military rites and given a flag. Well with the boy sandblasting, and the engine off to be gone through i was able to get back into my wood shop this weekend and build a case to display his flag. I used a flag case that was given to me during my military career.
During my last trip home to Iowa i procured several board ft of walnut from one of dads many junk piles. We cut this tree down together in 1980, took it to a saw mill, and stacked it in the shed, and there it has set since. So the item itseld not only has emotional value, but the lumber has memories tied to it. One piece of 8' x 11" provided enough material to make three of these. Seems whenever i do make something, someone else always wants one, so i am ahead of the game. :wink:
Anyway the parts list is all lumber planned down to 3/4"
1-base 5" x 23" (routered on 3 edges)
1- bottom front cross piece 1" x 18 3/4" (1/4" dado edge to allow for plexi glass)
2-side uprights 1 1/2" x 12 1/2" (1/4 dado edge to allow for plexi glass) (routered after mounting together with bottom and back supports)(approx 1/2" of this will become a tendon to slide into the bottom piece, see pics)
2-back side uprights -supports 1 7/8 x 12 7/8
plywood/hardboard back 12 1/2 x 12 1/2 x 18 (estimate)
2 small hinges, 1 hook and loop
1 piece of glass or plexi glass cut to fit opening.
4 - rubber, none skid none scrath bumps ("feet" )
Final product (example i followed)
here is some close up pics of dado's, cuts, and rough framing
http://i16.photobucket.com/albums/b46/v ... flag-5.jpg
http://i16.photobucket.com/albums/b46/v ... flag-4.jpg
http://i16.photobucket.com/albums/b46/v ... flag-3.jpg
http://i16.photobucket.com/albums/b46/v ... flag-2.jpg
Thought someone out there may wanna make one. Let me know what you think! John
During my last trip home to Iowa i procured several board ft of walnut from one of dads many junk piles. We cut this tree down together in 1980, took it to a saw mill, and stacked it in the shed, and there it has set since. So the item itseld not only has emotional value, but the lumber has memories tied to it. One piece of 8' x 11" provided enough material to make three of these. Seems whenever i do make something, someone else always wants one, so i am ahead of the game. :wink:
Anyway the parts list is all lumber planned down to 3/4"
1-base 5" x 23" (routered on 3 edges)
1- bottom front cross piece 1" x 18 3/4" (1/4" dado edge to allow for plexi glass)
2-side uprights 1 1/2" x 12 1/2" (1/4 dado edge to allow for plexi glass) (routered after mounting together with bottom and back supports)(approx 1/2" of this will become a tendon to slide into the bottom piece, see pics)
2-back side uprights -supports 1 7/8 x 12 7/8
plywood/hardboard back 12 1/2 x 12 1/2 x 18 (estimate)
2 small hinges, 1 hook and loop
1 piece of glass or plexi glass cut to fit opening.
4 - rubber, none skid none scrath bumps ("feet" )
Final product (example i followed)
here is some close up pics of dado's, cuts, and rough framing
http://i16.photobucket.com/albums/b46/v ... flag-5.jpg
http://i16.photobucket.com/albums/b46/v ... flag-4.jpg
http://i16.photobucket.com/albums/b46/v ... flag-3.jpg
http://i16.photobucket.com/albums/b46/v ... flag-2.jpg
Thought someone out there may wanna make one. Let me know what you think! John