3rd in a Series

ljwfarming

501 Club
Jim wrote:
F&H stands for French & Hecht. They made tractor wheels.
Right after John(Cub owner) and Jim Becker told me about the F&H wheel weights, I was reading thr May-June issue of Red Power Magazine. In the maibox section an article talked about buying F&H disc wheels to replace the round spokes on his F30. Who would have thunk it? By the way I wanted to thank you guys for helping me ID it. I meant to turn it over and see if it does have hooks on the back side, but I keep forgetting.

Maybe you could help me with this thing. A scrapper gave it to me. If it's not made of metal, they don't want it.
275201277.jpg


Larry
 
That looks like a hay sling for lifting loose hay into the hay mow. The picture doesn't show it clearly but where the ropes converge in the center there should be a latch that can be released by pulling on a lighter trip rope. We usually built the load by dividing it between 3 slings as we were loading it.
 
Thanks, GW!
There is a cast iron latch in the middle where the knot is. This thing isn't homemade, I can almost read some printing on one of the boards. All of the slats had been passed through a shaper of some sort. I'd be interested in knowing a little more about how it's used. I remember it being auctioned off. Nobody knew what it was, so they added it to pile of scrap metal. You know, the more you learn about different things, the more one realizes how ignorant he really is. Thanks, GW! 8)
Larry
 
That would have been placed on the wagon before it was loaded with loose hay, and the ends were used to lift it as a bundle , then the center latch released to dump it. Also could have been used just at the barn, and hay thrown onto it from the wagon, then raised and dumped.
 
John *.?-!.* cub owner":19fbfa9t said:
That would have been placed on the wagon before it was loaded with loose hay, and the ends were used to lift it as a bundle , then the center latch released to dump it. Also could have been used just at the barn, and hay thrown onto it from the wagon, then raised and dumped.

In our way of using them that was the beginning. The hay was levelled off and a second sling was placed over it. It was again loaded and levelled off and a third sling added. We had 4 slings but usually used only 3. To use a 4th sling would have required pulling the hay uphill beyond the reach of the loader and our wagon was too high to begin with.

Between uses the slings were stored on the front side of the front rack hanging from brackets that were old horse shoes.

All our hay for ~40 head of cattle, a few sheep, and the team was mowed, raked, loaded, and hoisted into the barn by mules and later horses. I didn't like it.
 
My old barn still has the pullies and trollies twenty five feet up into the rafters where the previous owner used this set up. i can only imagine the work that went into farming in those days. Still hard work today, but it had to be a lot more effort then.
 
GW: The sling seems to be a nifty little invention, but why would someone do it this way as opposed to baling hay ?? I would think bales would be easier to handle and allow one to get more into the barn - maybe a lack of proper equipment ??? A city boy's naive question. Craig
 
Craig - this was done before balers and when balers were not common. The early balers were stationary and hay was taken to them rather than pulling the baler around a field. It was as much work to bale the hay as it was to fill loose. Everyone just built barns big enough to store the loose hay.
 
Thanks BD - that makes sense. It never ceases to amaze me how situations/problems were handled in those early days. Necessity truly was the Mother of invention. C
 
I have never seen it tired, but the old timers used to claim that you could not take the loose hay form a barn, bale it, and put it back in the same space. They claimed the weight of the hay packed it down to the point that it occupied less space than baled hay did. Of course, a lot of that may have depended on the baler, some of them made tighter bales than others.
 
You could never finish filling a barn with loose hay. The next day, there was always room for more, a lot like filling a silo.
 
magnumpi":29kvmt93 said:
GW: The sling seems to be a nifty little invention, but why would someone do it this way as opposed to baling hay ?? I would think bales would be easier to handle and allow one to get more into the barn - maybe a lack of proper equipment ??? A city boy's naive question. Craig

Of course you're kidding! Balers cost money. Bale elevators cost money. Wire costs money and twine costs money. A son to help make loose hay is free.

We never had a baler, combine, corn picker, a decent tractor or any of the creature comforts to lighten the load. You haven't lived until you've cultivated 20 acres of corn one row at a time behind a team of horses. :evil:
 
I have a friend who grew up on a beautiful farm in Cascade Iowa and he said his first job on the farm was to lead the horse who was attached to the lifting rope for the hay. He would start with the horse close to the barn, and when told to do so, he would lead him out until the rope "was tight". The others involved in the operation would pull the trip rope and the process would be repeated again.

Sounds like a really labor intensive process to me! Give me a cub any day!!!

Their family had an H, but never used it until Jack was old enough to drive it...10 years old!!! He then used it to do a good deal of the chores on the farm.

Mike in La Crosse, WI
 
WisconsinCubMan":wukrid0s said:
I have a friend who grew up on a beautiful farm in Cascade Iowa and he said his first job on the farm was to lead the horse who was attached to the lifting rope for the hay. He would start with the horse close to the barn, and when told to do so, he would lead him out until the rope "was tight". The others involved in the operation would pull the trip rope and the process would be repeated again.

Sounds like a really labor intensive process to me! Give me a cub any day!!!

Their family had an H, but never used it until Jack was old enough to drive it...10 years old!!! He then used it to do a good deal of the chores on the farm.

Mike in La Crosse, WI

We used the same team to do all the hay making operations. After the sling was pulled to the top (there was a clamp that prevented it from coming back down) the team was moved to a different rope to pull the sling lengthways of the barn to whichever mow was being filled. By using a little timing the sling could be set to swinging to deposit the hay to one side of the mow.

Each load required hitching the team 6 times before hitching to the wagon again. Back to the field required backing the wagon to the loader so it could be hitched again. On a good day we made 5 loads... it was a LOT of hitching. It was my job to handle the horses and do the hitching. Remember they also did all the mowing and raking. They worked the hardest of all.
 
wow!! memories are rushing back........good ole benny and bessy. best dang mules a fella could follow. and when the hay is up start cranking the corn sheller.

now if you are really ready to try to get your mind around something imagine how hard the horses had to work to build the railroads. all the ground wasn't flat.
 
Back
Top