28a

[Beefie]

Currently in florida and a 28a disc set is on my way home cheap. Came down to move granaughter home and not as big of a load as i thought so i have about half of a 6-1// foot dodge half ton bed open. Insaw the disc on my way down but didnt measure it up as i only wanted a rock shaft and swinging drawbar he sold me.
Question for all: can i swueeze a 5 foot 28a in what open space i have? Can anyone provide actual dimensions?

 

[Ky Cub]

I'm guessing if you were to dismantle it completely you might fit it in.

 

[Beefie]

I'm guessing if you were to dismantle it completely you might fit it in.

Could work but time is a big factor plus tools. Guys in a housing developement and didnt see many tools

 

[Barnyard]

if you take the tongue off it should fit. Ask the guy to measure it for you.

 

[Bill V in Md]

Photo is a 28A disk harrow in back of my F150 standard length bed. Disk measurements are 60" W x 38" L x 30" H.

 

[Beefie]

if you take the tongue off it should fit. Ask the guy to measure it for you.

I did he takes a while to reply, ciuld be facebook

 

[Jim Becker]

Could work but time is a big factor plus tools. Guys in a housing developement and didnt see many tools

https://www.harborfreight.com/fully-polished-sae-combination-wrench-set-14-piece-68792.html

Separate it down to 2 gangs and a hitch, probably only a half dozen bolts to remove. Be sure it is well tied down so it doesn't destroy whatever else is in the truck.