1A tiller right hand drive

[Smokeycub]

Hi fellas, It's been a while since I've posted. Has anyone experienced a bevel gear moving out of alignment inside of the RH gear box for a 1A tiller? I'm not certain how it moved but it wasn't real snug on the shaft so I tried to stake in place but it moved again. What's strange is it was working great and I finished tilling, but when I took the tiller off the tractor I noticed the gears were no longer engaged. I looking for ideas on how to repair it. Thanks in advance - Ray

 

[BigBill]

If the gears aren’t engaged something moved. Did the shaft walk out?

https://www.partstree.com/models/tiller ... degrees-3/

Here’s the 1a but no exploded view of the 90 degree box.
https://www.partstree.com/models/tiller ... ttachment/

 

[Smokeycub]

Hi Bill, Thanks for responding. The shafts seem to be intact but the one bevel gear is moving out of position, I believe it's supposed to be a press fit. I that's the case I'll have to machine a new shaft for it.

 

[SamsFarm]

Is there a snap-ring groove on your shaft?