Generac GT990 17.5kw Portable genset Model #004583 start/idle/run Circuit control module

Well Guys, I thought I had this problem resolved https://farmallcub.com/community/th...on-vs-autolite-spark-plugs-comparison.118786/ but I'm continue to have intermittent issues with the Circuit Board control module. A little background: OEM part failed and was replaced with another OEM part that lasted about 1.5 years with intermittent use. When that one failed (with some of the same issues) I purchased and installed the 3rd module which lasted about 2 hours. This time the engine would not start because there was no spark/power at the plugs. I've since replaced it with the 4th module and it started immediately, now running as expected so it's yet to be determined how long this will last. (I did purchase a 3rd party warranty agreement with the last one.) So, my question is--is there anything that I might check to see why it's going through the control boards? They are resin sealed and I have no means or knowledge to be able to troubleshoot/test them, just swap parts. Stan
 
Update: recent aftermarket control circuit board failed. Seller has agreed to refund the full purchase amount so I' no closer to solving the problem. Looking for other options including replacing the entire machine! Stan
 
is the battery Good ??? low voltage starting fries this module
Thanks Tim. Yup, upgraded to OEM lawn mower U1 battery to automotive 550 CCA not long after I got it. The OEM setup was not enough amps to turn the engine fast enough to start if it was slow about starting. I've had several generator mechanics say that this unit has about lived out its useful life at 20 years old. Stam
 
Back
Top