Have found info about aftermarket brake bands being of poor lining quality. Some stated very very poor stopping ability, others of lining lasting a terrible short time. All posts are older, maybe three four years ago. Does this mean quality has improved, or everyone just stopped buying them. Also seems these same bands are what many well known tractor parts shops sold. Ones I'm looking at are made in Taiwan Part# R0616. Are they still a waste of money and the better deal is to have them relined. If so, could someone please post a good place to have them relined at. Don't want to have them relined, then find out they used the same poor quality lining material.
Thanks
Tim
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Quality of brake bands from Taiwan?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 131
- Joined: Wed Dec 20, 2017 12:13 am
- Zip Code: 29669
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Quality of brake bands from Taiwan?
Several of us have relined Cub brake bands before using material from McMaster-Carr. The video/info found here:
http://farmallcub.com/phpBB2/viewtopic.php?f=54&t=66324
You might check what you need versus what McMaster-Carr sells. It is good quality material. Hope this helps.
http://farmallcub.com/phpBB2/viewtopic.php?f=54&t=66324
You might check what you need versus what McMaster-Carr sells. It is good quality material. Hope this helps.
-
- Team Cub
- Posts: 11859
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Quality of brake bands from Taiwan?
Adding to what Stanton says; McMaster-Carr sells a variety of widths and thicknesses and the lining can be purchased by the foot.
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 5+ Years
- Posts: 131
- Joined: Wed Dec 20, 2017 12:13 am
- Zip Code: 29669
Re: Quality of brake bands from Taiwan?
Excellent Stanton and Bob, info given for Cub easily transferred to my project. Will look into McMaster- Carr.
Thanks
Tim
Thanks
Tim
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 7 guests