330 hitch
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub
- Posts: 17114
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: 330 hitch
Does this help?
https://www.mycnhistore.com/us/en/casei ... 5056875BD6
Click on "Drawbars and Hitches".
https://www.mycnhistore.com/us/en/casei ... 5056875BD6
Click on "Drawbars and Hitches".
-
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
-
- 5+ Years
- Posts: 33
- Joined: Thu Sep 14, 2017 2:53 pm
- Zip Code: 00000
Re: 330 hitch
330 should be in c family . hitch doesn’t have down pressure missing parts on hydraulic cylinder side.tractor has power steering ,one remote and 24 rear tires
-
- 5+ Years
- Posts: 33
- Joined: Thu Sep 14, 2017 2:53 pm
- Zip Code: 00000
Re: 330 hitch
I believe it has tel-a-dep and is missing most of the parts .still has mount on side of dash for it
-
- Team Cub
- Posts: 17114
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: 330 hitch
The 330 is in the family with the 300 and 350. It is unclear what you are trying to accomplish, hard to know what info you need. Down pressure is controlled by placement of a pin.
-
- 5+ Years
- Posts: 33
- Joined: Thu Sep 14, 2017 2:53 pm
- Zip Code: 00000
Re: 330 hitch
Becker I’m trying to get tractor operational again .it is missing all the draft control parts . The handle and linkage to the front of the hitch. In what I have there in nowhere that I see to put a pin in hitch to get down pressure like 300 utility.
-
- Team Cub
- Posts: 17114
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: 330 hitch
We are still guessing at what you are trying to do. Are you trying to put a 330 hitch on something in the C/200/230 line or are you trying to get a functional hitch on a 330 Utility? I an guessing you are working on a 330 Utility. The pin to get down pressure goes in sideways below the bottom of the cylinder. If you go to the parts catalog as linked in my first post, you can see the relevant parts in diagram 246. This will probably work as a direct link:
https://www.mycnhistore.com/us/en/caseih/tractors/utility/naaa87uti099legacy/international-utility-tractor/drawbar-hitches/drawbars-and-hitches-2-pt-fast-hitch-wtraction-control-traction-control-international-330/cn/30427A75-8FBF-E111-9FCE-005056875BD6/DFCD6496-EFBE-E111-9FCE-005056875BD6
The cylinder is pinned to part 3. Part 3 is free to pivot on pin 4. Pin 1 has 2 holes in part 3. In one position, it keeps part 3 from pivoting and you have down pressure. When pin 1 is in the other hole, it is simply stored there and part 3 is free to pivot, eliminating down pressure.
Your hitch can be functional without a lot of the draft control parts. I suppose a previous owner removed them because they were worn out or otherwise non-functional. Without specifics of what you have or don't have, there isn't much I can suggest for how to deal with it other than to suggest you find replacements for the missing pieces.
https://www.mycnhistore.com/us/en/caseih/tractors/utility/naaa87uti099legacy/international-utility-tractor/drawbar-hitches/drawbars-and-hitches-2-pt-fast-hitch-wtraction-control-traction-control-international-330/cn/30427A75-8FBF-E111-9FCE-005056875BD6/DFCD6496-EFBE-E111-9FCE-005056875BD6
The cylinder is pinned to part 3. Part 3 is free to pivot on pin 4. Pin 1 has 2 holes in part 3. In one position, it keeps part 3 from pivoting and you have down pressure. When pin 1 is in the other hole, it is simply stored there and part 3 is free to pivot, eliminating down pressure.
Your hitch can be functional without a lot of the draft control parts. I suppose a previous owner removed them because they were worn out or otherwise non-functional. Without specifics of what you have or don't have, there isn't much I can suggest for how to deal with it other than to suggest you find replacements for the missing pieces.
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 2 guests