154 PTO clutch rebuild

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
rkegerise5
Posts: 2
Joined: Sat Mar 05, 2022 12:48 pm
Zip Code: 18235

154 PTO clutch rebuild

Postby rkegerise5 » Sat Mar 05, 2022 12:54 pm

I am looking for some guidance on rebuilding the PTO clutch for a 154. Any videos, how to’s? Picture diagrams other than the parts blow out?

Also what orientation do the spring washers go? () or ))? I have read they go )) but when I took them off they were ()

rkegerise5
Posts: 2
Joined: Sat Mar 05, 2022 12:48 pm
Zip Code: 18235

Re: 154 PTO clutch rebuild

Postby rkegerise5 » Wed Mar 23, 2022 1:54 pm

Anyone?

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 19667
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: 154 PTO clutch rebuild

Postby Eugene » Wed Mar 23, 2022 3:55 pm

Been years since I worked on my 154's PTO clutch. So, no words of wisdom. Basically, I just cleaned it up and reassembled.

I disassembled, then removed the burs on cup assembly. Removed the burs on the friction disks and turned the friction discs around.

Spring washers, I would put them back in the same direction they came out.
I have an excuse. CRS.

outdoors4evr
10+ Years
10+ Years
Posts: 2686
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48370
Tractors Owned: 184
Location: Oxford, MI

Re: 154 PTO clutch rebuild

Postby outdoors4evr » Thu Mar 24, 2022 5:39 am

The service manual (GSS-1408) only shows a graphic on page 8-8 and says install the wave springs as shown. The graphic looks like they are shown () or )( There are some measurements in the manual to take once assembled. I assume if assembled wrong, it will not meet the specification.

The parts manual (TC-131) shows a graphic on page 7-12 with much more content in it so it is a smaller graphic. No details in the parts manual so I'd go with the service manual graphic and text.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade

User avatar
SONNY
10+ Years
10+ Years
Posts: 3899
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 61722

Re: 154 PTO clutch rebuild

Postby SONNY » Thu Mar 24, 2022 1:09 pm

IF you put the waves the wrong direction,----- you will know it cause you cant get the clutch together. then take it apart and reverse them and it will fit. I went thru that on one of my 185's and it was a nightmare to get set right. I had to put a couple of the old washers in mine PLUS all of the new ones from the kit so its different on each one.
The kit I got from IH had the complete directions in it but I cant find it now,--may have tossed it out after I got done. this was many years ago when I did mine.
I know I will never do another one after that ordeal! lol!


  • Similar Topics
    Replies
    Views
    Last post

Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 0 guests