I have a planter for my 1963 farmall the# on it is 511914R1can someone direct me to a page that will show what i need to

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
KPinder
Posts: 3
Joined: Thu May 06, 2021 8:15 am
Zip Code: 70661

I have a planter for my 1963 farmall the# on it is 511914R1can someone direct me to a page that will show what i need to

Postby KPinder » Thu May 06, 2021 8:34 am

I have a planter for my 1963 farmall with a side mount planter the# on it is 511914R1can someone direct me to a page that will show what i need to make it plant corn and peas

SamsFarm
501 Club
501 Club
Posts: 1338
Joined: Wed Jan 20, 2021 8:21 pm
Zip Code: 44410
Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
Fast Hitch CS Bell 60 Grain Mill
Home Made Fast Hitch Potato Plow
54A Blade

Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)

Misc Belly Mowers

Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower

Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill
Location: Ne Ohio

Re: I have a planter for my 1963 farmall the# on it is 511914R1can someone direct me to a page that will show what i nee

Postby SamsFarm » Thu May 06, 2021 9:26 am

511914R1 Is a part number not a model number.

You might have one of the following planters; 170, 171, 172, or 174!

You will find there are operators manuals in the pdf manuals section here at farmallcub.com.

Start by clicking the quick links tab in your screens upper left corner.

If you have all the parts for your planter, you will have to set the proper sprockets up to get the spacing you want and you will need the proper seed plates for the seeds you want to plant.

If you have a lot of seed plates, you can experiment with the different cell sizes to plant different crops, even though the planter plates might have been made for 1 specific crop, like corn.


Here is a company that makes seed plates ⬇️.
https://lincolnagproducts.com/
Check out all the different ones they make!

Some times you can find a good deal on them used, craigslist, evilbay, facebook, and local auctions!

I have used different sized corn plates to plant (corn of course) sunflowers, green beans, and peas!

Happy Tractoring!

Mht
Cub Star!!
Cub Star!!
Posts: 373
Joined: Sun Jul 08, 2018 9:02 pm
Zip Code: 27606
Tractors Owned: 1949 farmall cub(building from parts) 1950 farmall cub
1971 David Brown 880 selectamatic
Circle of Safety: Y

Re: I have a planter for my 1963 farmall the# on it is 511914R1can someone direct me to a page that will show what i nee

Postby Mht » Thu May 06, 2021 3:47 pm

Definitely check out all the pdf manuals. I’ve spent the last two years collecting and finally using my 174 planter on my 1949 cub. Most parts can be “mixed and matched” to create a very useable garden planter if that is what you are trying to do. The only things that aren’t interchangeable are the planter hoppers and it’s base. The Richmond hopper and the combination hopper both use the same plates of which plastic corn plates are easily and cheaply obtained and are easily modified for various seeds and spacings. I find it easier to change plates than gears. If you post some pictures of what you have you will gather a lot more information

BSR
5+ Years
5+ Years
Posts: 324
Joined: Tue Sep 06, 2016 12:57 pm
Zip Code: 00000

Re: I have a planter for my 1963 farmall the# on it is 511914R1can someone direct me to a page that will show what i nee

Postby BSR » Thu May 06, 2021 6:13 pm

Does your planter look like this one?
174 Planter with Sidedresser
Attachments
20210415_082848-1008x567.jpg

User avatar
Glen
10+ Years
10+ Years
Posts: 5396
Joined: Mon Mar 19, 2012 7:33 pm
Zip Code: 00000
Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
Circle of Safety: Y
Location: Wa.

Re: I have a planter for my 1963 farmall the# on it is 511914R1can someone direct me to a page that will show what i nee

Postby Glen » Fri May 07, 2021 1:45 am

Hi,
511914R1 is a part number of one part of the planter.
Below is a listing for the part of the planter, showing what it is.

http://www.ihpartsandequipment.com/impl ... -base.html

It says it is used on the 171, and 172 planters, and others. Those are the model numbers of planters.
IH made owner's manuals for them, with lots of info in them.

Below is the 171, and 172 owner's manual. I would read it and see if the pics look like your planter. :)

http://farmallcub.com/rudi_cub/www.clea ... index.html

JoeB
10+ Years
10+ Years
Posts: 255
Joined: Fri Apr 03, 2009 11:37 pm
Zip Code: 35650
eBay ID: retrocrop
Tractors Owned: Acres of Red Tractors.
Location: Moulton, Alabama (NW AL)

Re: I have a planter for my 1963 farmall the# on it is 511914R1can someone direct me to a page that will show what i nee

Postby JoeB » Sat May 08, 2021 12:19 pm

BSR wrote:Does your planter look like this one?
174 Planter with Sidedresser


Richmond hopper would make that a 172 planter.

JoeB
10+ Years
10+ Years
Posts: 255
Joined: Fri Apr 03, 2009 11:37 pm
Zip Code: 35650
eBay ID: retrocrop
Tractors Owned: Acres of Red Tractors.
Location: Moulton, Alabama (NW AL)

Re: I have a planter for my 1963 farmall the# on it is 511914R1can someone direct me to a page that will show what i nee

Postby JoeB » Sat May 08, 2021 12:24 pm

Glen wrote:Hi,
511914R1 is a part number of one part of the planter.
Below is a listing for the part of the planter, showing what it is.

http://www.ihpartsandequipment.com/impl ... -base.html

It says it is used on the 171, and 172 planters, and others. Those are the model numbers of planters.
IH made owner's manuals for them, with lots of info in them.

Below is the 171, and 172 owner's manual. I would read it and see if the pics look like your planter. :)

http://farmallcub.com/rudi_cub/www.clea ... index.html



That mounting base is for the "Single Seed Hopper" , it would have been used on the 171 and 172 for certain, and possibly the 170 planter unit as well. I haven't personally ran into that hopper used with anything other than the Blackland planter units ( 171 Planter for cub), these were common in Texas, Oklahoma and surrounding areas . Being that most of these planters are pieced together now, it could have a runner under it by now, same owner's manual would cover both.

KPinder
Posts: 3
Joined: Thu May 06, 2021 8:15 am
Zip Code: 70661

Re: I have a planter for my 1963 farmall the# on it is 511914R1can someone direct me to a page that will show what i nee

Postby KPinder » Sat May 08, 2021 4:19 pm

Glen wrote:Hi,
511914R1 is a part number of one part of the planter.
Below is a listing for the part of the planter, showing what it is.

http://www.ihpartsandequipment.com/impl ... -base.html

It says it is used on the 171, and 172 planters, and others. Those are the model numbers of planters.
IH made owner's manuals for them, with lots of info in them.

Below is the 171, and 172 owner's manual. I would read it and see if the pics look like your planter. :)

http://farmallcub.com/rudi_cub/www.clea ... index.html

Thank you

KPinder
Posts: 3
Joined: Thu May 06, 2021 8:15 am
Zip Code: 70661

Re: I have a planter for my 1963 farmall the# on it is 511914R1can someone direct me to a page that will show what i nee

Postby KPinder » Sat May 08, 2021 4:27 pm

Thank y'all for all the info it's looking like i have a bunch of missing parts or other planter parts i have been searching for someone local that has one i could go and look at im more of a let me touch it type than look at the manuel type just the way I've always been. As ya'll know these things are hard to find.

User avatar
Glen
10+ Years
10+ Years
Posts: 5396
Joined: Mon Mar 19, 2012 7:33 pm
Zip Code: 00000
Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
Circle of Safety: Y
Location: Wa.

Re: I have a planter for my 1963 farmall the# on it is 511914R1can someone direct me to a page that will show what i nee

Postby Glen » Sat May 08, 2021 5:15 pm

Hi,
Below is the 170-C and 170-D Planter owner's manual, you could look through it too, and see if your planter looks the same.

http://farmallcub.com/rudi_cub/www.clea ... index.html

Below is the implement manual section, there are other planters there. :)

http://farmallcub.com/rudi_cub/www.clea ... index.html


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Glen and 3 guests