Swapping Rockshaft on Touch Control

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Ct Cub
Posts: 17
Joined: Tue Dec 22, 2020 8:49 pm
Zip Code: 06492

Re: Swapping Rockshaft on Touch Control

Postby Ct Cub » Wed Jan 13, 2021 1:05 pm

It was there but the spot where worn was above the shield
Top
User avatar
Dale Finch
10+ Years
10+ Years
Posts: 5923
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '51 Cub "Bernie" with Fast Hitch
'55 Cub "Bruno" with Woods 59 mower
'55 Cub "Bertha" with Woods 42 mower
'55 Cub "Ben" with Woods 42 mower
'56 Cub "Boris" with Mott Flail mower
Circle of Safety: Y
Location: NC, Chapel Hill

Re: Swapping Rockshaft on Touch Control

Postby Dale Finch » Wed Jan 13, 2021 2:33 pm

You had both clips...the one at the pedal pivot and the one at the panel?
Dale Finch
Image
Circle of Safety
Top
User avatar
Glen
10+ Years
10+ Years
Posts: 5352
Joined: Mon Mar 19, 2012 7:33 pm
Zip Code: 00000
Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
Circle of Safety: Y
Location: Wa.

Re: Swapping Rockshaft on Touch Control

Postby Glen » Wed Jan 13, 2021 8:00 pm

Hi,
Below is a post I put wiring info on, it shows a new battery to starter cable for the 6 volt system, if you need one.

viewtopic.php?f=1&t=109588

It helps to take the clips loose, and bend the cable so it stays close to the clutch housing, and away from the clutch pedal, and away from where your foot is, when the clips are fastened on again. :)
Top
  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 6 guests