This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Pin holes in Air Cleaner Cup
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Pin holes in Air Cleaner Cup
If you heat epoxy with a heat gun, it will get thin and flow. You could then get it to flow around the bottom of the cup and fill like a coating. Because the epoxy is thin, it will want to flow into the pinholes so before you start pouring epoxy, put some blue painters tape on the bottom of the pinholes. Let the epoxy harden before removing the painters tape.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
Who is online
Users browsing this forum: No registered users and 2 guests