1000 loader seal replacement

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Winfield Dave
10+ Years
10+ Years
Posts: 3434
Joined: Thu Apr 22, 2010 2:31 pm
Zip Code: 17953
Tractors Owned: ......Almost enough
Circle of Safety: Y
Location: PA, Middleport (Schuylkill County)

1000 loader seal replacement

Postby Winfield Dave » Wed Oct 23, 2019 11:32 am

I am trying to replace the seals in my small cylinder on my loader. But I can't get the endcap off to access the inside.
It doesn't seem to screw off like a normal hydraulic cylinder.
There is this slot close to the joint and I'm wondering if that has something to do with the cap not screwing off.
The parts book doesn't show the slot or any kind of key in the cylinder at that point.
Any suggestions?
IMG_2699.JPG
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill

Jim Becker
Team Cub
Team Cub
Posts: 16443
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: 1000 loader seal replacement

Postby Jim Becker » Wed Oct 23, 2019 1:13 pm

There were two versions of that cylinder. The parts book shows a "retaining key" for one and a "retaining wire" for the other. They look about the same in the drawings. I've never had one of them apart. It looks like getting it apart has to involve either rotating the cap or pushing in on the part in the slot, maybe both in the proper combination.

User avatar
Winfield Dave
10+ Years
10+ Years
Posts: 3434
Joined: Thu Apr 22, 2010 2:31 pm
Zip Code: 17953
Tractors Owned: ......Almost enough
Circle of Safety: Y
Location: PA, Middleport (Schuylkill County)

Re: 1000 loader seal replacement

Postby Winfield Dave » Wed Oct 23, 2019 4:34 pm

I got it sorted out with my local IH shop.
Thanks Jim.
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill

Bob McCarty
Team Cub
Team Cub
Posts: 11221
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: 1000 loader seal replacement

Postby Bob McCarty » Wed Oct 23, 2019 5:01 pm

Winfield Dave wrote:I got it sorted out with my local IH shop.
Thanks Jim.

Dave, what was the "fix"?
"We don't need to think more,
we need to think differently."
-Albert Einstein

tst
10+ Years
10+ Years
Posts: 4693
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety: Y

Re: 1000 loader seal replacement

Postby tst » Wed Oct 23, 2019 7:48 pm

that style he has a snap ring that you squeeze together to get the cap off, many times the ends are broken off the snap ring so it can be fun to get out at times

User avatar
Winfield Dave
10+ Years
10+ Years
Posts: 3434
Joined: Thu Apr 22, 2010 2:31 pm
Zip Code: 17953
Tractors Owned: ......Almost enough
Circle of Safety: Y
Location: PA, Middleport (Schuylkill County)

Re: 1000 loader seal replacement

Postby Winfield Dave » Thu Oct 24, 2019 9:03 am

Bob McCarty wrote:Dave, what was the "fix"?

This takes a straight "snap ring" that has a hook on the end.
(My hook was straightened out during disassembly)
bucket cylinder ring.JPG

You align the hole in the ring groove with the slot in the cylinder body.
bucket cylinder groove hole.JPG

Insert snap ring hook thru slot and into the hole.
Then while turning the body feed the snap ring until you complete one rotation.

The reason I had trouble was my ring was frozen in the groove
and it wouldn't rotate to where I could get to the end to start the removal.
bucket cylinder slot.JPG
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill

Bob McCarty
Team Cub
Team Cub
Posts: 11221
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: 1000 loader seal replacement

Postby Bob McCarty » Thu Oct 24, 2019 9:12 am

Thnx for the explanation.
"We don't need to think more,
we need to think differently."
-Albert Einstein


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 1 guest