Original front wheel seals

[Command52]

Is there anyone who reproduces the original style front wheel seals, If not do you have a updated number for the wheel seals Im not having any luck with the numbers on the cross over chart i found on here Thank You Billy

[tst]

national seal 6312, they are leather like the factory type, they are pricey, if the old ones are good leave them alone

[Glen]

Hi,
TM Tractor at the bottom of the page has the seals also. There are pics of it there.

http://www.tmtractor.com/new/st/592fp.htm

There is a felt there also.

http://www.tmtractor.com/new/st/856fp.htm

If the wear ring in the hub is gone, or bad, they have those also.

http://www.tmtractor.com/new/st/673fp.htm

It looks like all the parts are available at Case IH also.

You can gently lift and work the seal lip up again, and remove old grease from the seal, with solvent. They might still be good. I agree with Tim, if the seals are still good, it is easier to leave them there. The Cub owner's manual says leave the seals on the spindle when cleaning and greasing the bearings.