https://www.amazon.com/IRWIN-Metal-Cutt ... B0030XMFHK
Purchased the 68 Irwin teeth blade from the local hardware store for $45.00. Have cut around 70 sheet metal roofing panels for siding and several translucent light panels for the hog barn. Still using the blade. Also have cut some wood 2x4's with the blade.
Prior to purchase used up the on hand grinding blade to cut sheet metal. Wore out the blade on 2 or 3 cuts.
The sheet metal cutting blade is very inexpensive if you have a large number of roofing or siding cuts to make.
Blade for cutting sheet metal/roofing material
Forum rules
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.
FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.
Send issues regarding reviews to Cub@farmallcub.com.
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.
FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.
Send issues regarding reviews to Cub@farmallcub.com.
-
- Team Cub Mentor
- Posts: 19596
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Blade for cutting sheet metal/roofing material
I have an excuse. CRS.
-
- 501 Club
- Posts: 579
- Joined: Wed Apr 04, 2018 1:33 pm
- Zip Code: 22650
Re: Blade for cutting sheet metal/roofing material
Thanks for the review. The reviews on amazon are positive but I don't know those people. This is an amazing blade by your experience.
-
- 5+ Years
- Posts: 1909
- Joined: Tue May 16, 2017 9:25 am
- Zip Code: 63628
- Tractors Owned: '40 H
'44 B
'47 Cub
'49 C
54A Blade
42 Woods Mower
Henderson Loader
Cultivators
No. 8 Little Genius 2-12 Plow
IH Running Gear - Circle of Safety: Y
- Location: Bonne Terre, Mo
Re: Blade for cutting sheet metal/roofing material
Thanks, for posting this. I have cut a lot of roofing metal. That would have been handy to have.
-
- Team Cub Mentor
- Posts: 4756
- Joined: Tue Jun 07, 2005 2:30 pm
- Zip Code: 46055
- Tractors Owned: -
1950 Demo,1956 w/ FH, 1959 w 59" mower,
Cub L-54 Blade,152 Plow
189 plow, LF 194 Plow, Woods 42" Mower,
Choremaster Garden tractors & Implements
Antique Gas engines - Circle of Safety: Y
- Location: IN, McCordsville
Re: Blade for cutting sheet metal/roofing material
We use something similarity to that except it a diamond blade that is for 4.5" in the fire service.
In my line of work
" EVERYBODY GOES HOME THE NEXT MORNING"
" EVERYBODY GOES HOME THE NEXT MORNING"
-
- 10+ Years
- Posts: 1615
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
Re: Blade for cutting sheet metal/roofing material
that blade looks/sounds similar to a blade we called a "blue blade " ( brand name ?) , it came as a package , dedicated saw and blade . we used that blade for just about everything (mainly metal ) the last two years at lsu . they were still using it when i retired . i used it to cut rotted roof decking , i did not have to worry about hitting the nails . the first time my boss found out i was using it for decking , he freeked out , " THATS FOR METAL NOT WOOD "Eugene wrote:https://www.amazon.com/IRWIN-Metal-Cutting-Circular-Blade-4935560/dp/B0030XMFHK
Purchased the 68 Irwin teeth blade from the local hardware store for $45.00. Have cut around 70 sheet metal roofing panels for siding and several translucent light panels for the hog barn. Still using the blade. Also have cut some wood 2x4's with the blade.
Prior to purchase used up the on hand grinding blade to cut sheet metal. Wore out the blade on 2 or 3 cuts.
The sheet metal cutting blade is very inexpensive if you have a large number of roofing or siding cuts to make.

-
- Similar Topics
- Replies
- Views
- Last post
-
-
Cast hub and sheet metal hub
by ShawnAgne » Thu Jul 29, 2021 9:03 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 1
- 217
-
by Jim Becker
Thu Jul 29, 2021 9:13 pm
-
-
- 1
- 687
-
by Jim Becker
Tue Jul 28, 2020 12:31 pm
-
- 5
- 380
-
by Stanton
Thu Jul 30, 2020 8:50 am
-
- 17
- 613
-
by Stanton
Sat Feb 05, 2022 6:53 am
-
- 26
- 991
-
by padre
Tue Aug 27, 2019 9:19 pm
Return to “Tool Talk and Reviews”
Who is online
Users browsing this forum: No registered users and 0 guests