Clutch pressure plate springs

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Duner
5+ Years
5+ Years
Posts: 84
Joined: Mon Jan 25, 2016 1:14 pm
Zip Code: 00000

Clutch pressure plate springs

Postby Duner » Sun Jul 25, 2021 8:43 am

One of my 3 springs is broken. Are these springs available separately from the pressure plate assembly.
Thanks

User avatar
Dale Finch
10+ Years
10+ Years
Posts: 6073
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower
Circle of Safety: Y
Location: NC, Chapel Hill

Re: Clutch pressure plate springs

Postby Dale Finch » Sun Jul 25, 2021 9:47 am

Which springs? The coil ones (#11) or the flat ones (#5)?

http://farmallcub.com/rudi_cub/www.cleancomputes.com/Cub/Cub%20Parts%20Manuals/TC-37F%20Revision%206%20(08-79)/Group%20-%2007%20-%20Drive%20Train/Page-02.jpg

Where are you located? I have a "parts" clutch here in NC that might have what you need.

OOPS! Sorry...missed that your tractor is a number series! :roll:
Last edited by Dale Finch on Sun Jul 25, 2021 2:40 pm, edited 1 time in total.
Dale Finch
Image
Circle of Safety

indy61
10+ Years
10+ Years
Posts: 1301
Joined: Fri Jan 25, 2008 9:02 am
Zip Code: 00000
Circle of Safety: Y

Re: Clutch pressure plate springs

Postby indy61 » Sun Jul 25, 2021 10:16 am


Duner
5+ Years
5+ Years
Posts: 84
Joined: Mon Jan 25, 2016 1:14 pm
Zip Code: 00000

Re: Clutch pressure plate springs

Postby Duner » Sun Jul 25, 2021 11:54 am

Thanks to the both of you for quick replies and good info.
I am in WI but will probably go with new springs, Just discovered broken spring last evening after mowing.
Clutch was acting a little off so I removed tin by shifter lever so I could see a little bit an noticed fresh break on coil spring.
Might be able to finish the mowing season as is.

indy61
10+ Years
10+ Years
Posts: 1301
Joined: Fri Jan 25, 2008 9:02 am
Zip Code: 00000
Circle of Safety: Y

Re: Clutch pressure plate springs

Postby indy61 » Sun Jul 25, 2021 12:32 pm

Duner wrote:Might be able to finish the mowing season as is.

You might and hopefully it doesn't cause more damage requiring complete clutch and flywheel replacement.

outdoors4evr
10+ Years
10+ Years
Posts: 2686
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48370
Tractors Owned: 184
Location: Oxford, MI

Re: Clutch pressure plate springs

Postby outdoors4evr » Mon Jul 26, 2021 5:42 am

If you replace one, replace them all so they are all the same strength.
Here are just the springs:
https://hamiltonbobs.com/cart/product/c ... lo-boy-mm4
Here are all the individual parts minus the pressure plate:
https://hamiltonbobs.com/cart/product/c ... lo-boy-mm4
This is the assembly.
https://hamiltonbobs.com/cart/product/c ... lo-boy-mm4
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade

BigBill
10+ Years
10+ Years
Posts: 7388
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: Clutch pressure plate springs

Postby BigBill » Tue Jul 27, 2021 11:39 pm

check your drive shaft spline too.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.


  • Similar Topics
    Replies
    Views
    Last post

Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 1 guest