This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
184 PTO Switch
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 155
- Joined: Sat Jul 09, 2005 2:52 pm
184 PTO Switch
Switch won't turn on blades. Anyone have any suggestions and/or troubleshooting tips?
- Greg Armstrong
- 5+ Years
- Posts: 142
- Joined: Tue Mar 29, 2016 2:50 pm
- Zip Code: 43074
- Tractors Owned: 1980 Cub Lo-Boy 184
- Location: Sunbury, OH
Re: 184 PTO Switch
Does the PTO engage if you jumper the wires on the switch? If yes, clean switch with contract cleaner or replace the switch. There is a Stens switch on Amazon for $20. If no, check the fuse in the dash and check for voltage at PTO clutch connection. If all that is good, your PTO clutch is bad.
Edit:
Stens 430-508 PTO Switch
Edit:
Stens 430-508 PTO Switch
-
- 10+ Years
- Posts: 155
- Joined: Sat Jul 09, 2005 2:52 pm
Re: 184 PTO Switch
Thanks for the info.
Didn't know about the fuse. Exactly where is it located?
Didn't know about the fuse. Exactly where is it located?
- MikeEyre74
- 5+ Years
- Posts: 225
- Joined: Wed Apr 03, 2019 5:44 am
- Zip Code: 06063
- Tractors Owned: Standard F-Cub, 1949
John Deere Model A, 1948
Wheel Horse 312-8, 1987
Re: 184 PTO Switch
Usually right there on the dashboard above the switch.
Standard F-Cub, 1949
John Deere Model A, 1948
John Deere Model A, 1948
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: 184 PTO Switch
Definitely check the fuse first. The fuse holders are not water resistant and hold water (then rust).
Once you get it cleaned up, add some dielectric grease to the fuse and the fuseholder.
Once you get it cleaned up, add some dielectric grease to the fuse and the fuseholder.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 12 guests