This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
farmall m governor
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 1
- Joined: Tue Mar 17, 2015 6:46 pm
- Zip Code: 00000
farmall m governor
What is the correct way to adjust the governor to the carburetor. Ever since I've had this tractor it would never idle down very low so i read in the repair manual about adjusting the governor to the throttle shaft. To get the tractor to idle i adjusted the throttle shaft conecting rod down on the linkage so the pin would go through while the throttle was at wide postion but it is now to the bottom of the threads. Is this where it should be?
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 4 guests