This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall H transmission
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Farmall H transmission
Has anyone ever replaced the input shaft seal and bearing on an H? Can it be done without splitting? what is involved?
Thanks
Thanks
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall H transmission
A cousin's S.i.L. took pity on me and has offered to change the seal for me. Boy is he gonna be in for a surprise on this job. I did clean the inside of the torque tube the best I could. Before
After
After
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Farmall H transmission
Looks nice and clean (or there-abouts). Be sure to replace the rubber washers on each side of your tapered bolts. Might also weld up the tapered bolts if really worn. That was the advice I received, but mine were not that worn.
Glad you got someone else to help out.
Glad you got someone else to help out.
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall H transmission
Me too, because without his help it would not get done.Stanton wrote:Glad you got someone else to help out.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: Farmall H transmission
I kinda doubt that. I can come up with several people I could volunteer to do it. Some are even mechanics!John *.?-!.* cub owner wrote:Me too, because without his help it would not get done.Stanton wrote:Glad you got someone else to help out.
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall H transmission
does Jeremy have any idea of what you are volunteering him for.Scrivet wrote:....I kinda doubt that. I can come up with several people I could volunteer to do it. Some are even mechanics!
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 523
- Joined: Fri Feb 11, 2011 6:06 pm
- Zip Code: 62995
- Tractors Owned: 1951 Farmall Cub
1950 John Deere A
1949 Farmall Cub
1943 Farmall H
1940 Farmall H
1953 Farmall Super M
1962 Massey Ferguson 65 - Circle of Safety: Y
- Location: Southern Illinois
Re: Farmall H transmission
I repaired a transmission on an H about 10 years ago or more. Bearing went out on input shaft.
The front seal job is easy with the hydraulic system removed like yours is.
I am suppose to pickup another H to fix. The guy has not called me back yet.
Rodney
The front seal job is easy with the hydraulic system removed like yours is.
I am suppose to pickup another H to fix. The guy has not called me back yet.
Rodney
USAF 1976 - 1996
- Andrew Z
- 10+ Years
- Posts: 205
- Joined: Wed Jul 11, 2007 8:37 am
- Zip Code: 06234
- Location: CT. Brooklyn
Re: Farmall H transmission
Can all be done in frame, just remove shaft. The input cupler can be a pain to get out as they have a tendency to look on to the key way hard.
49 Cub, and many other Farmalls and one Orange critter
This is Farmall Country!!
This is Farmall Country!!
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall H transmission
A neighbor came up and applied his big foot to an extension on the ratchet while I held it all in place and we got the pump drive lug off the transmission. It looks like we bent the bar we had stuck in the yoke of the input shaft to hold it though.
The drive lug came hard all the way, and by the looks of the threads I better call JP Tractor Monday to order another one.
The drive lug came hard all the way, and by the looks of the threads I better call JP Tractor Monday to order another one.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall H transmission
Cousin's son in law that was interested in helping never showed up, so now that things have slowed down, the garden turned under, Scrivet's tractor shipped off, and Christmas parades out of the way, I am going to tackle Dad's H. I rigged up a piece of chip board on some 6x6 cribbing to get me within easier reach of the drive shaft, etc., but no longer than I can lay on that board at a time this job may take a while.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 353
- Joined: Sun Nov 30, 2008 3:12 pm
- Zip Code: 63664
- Circle of Safety: Y
- Location: Mo. Potosi
Re: Farmall H transmission
John im scheduled home Dec 22 and don't go back out till Jan 5. Excluding the holiday days, if u pick a day that u wanna work on that, I will volunteer a days work to ur project. If the garage is semi warm and you can hand me the tools we"ll see if we can git er done
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall H transmission
Semi-warm I can arrange for, unless the temps are extreme. I have 2 sets of the double dome radiant heater that mount on 20lb. propane tanks, plus a torpedo type propane heater, along with 3 full tanks.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall H transmission
I got it apart today, but rather than typing it all again, here is the link to the discussion on Red Power Magazine.
http://www.redpowermagazine.com/forums/ ... opic=87845
http://www.redpowermagazine.com/forums/ ... opic=87845
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall H transmission
Jesse (10 year old neighbor across the creek) came over today and while I laid under the tractor he passed me parts and tools. I had to stop a time or two and let my back relax, but we got the drive train back in. While I have some time I think I will rebuild the worn out governor and check the leak in radiator. Now to save up enough money to refill the transmission. 5 gallons.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 5 guests