Figured I’d ask one more to anyone out there who has spent some time messing with these tractors. I was going to replace a seal on the rear axle, losing some hydraulic fluid, slow drip.
Has anyone done this? Is the seal accessible once removing the wheel, or is it located deeper into, toward the center of the axle?
Any info would be appreciated. 1955-56 IH 300 utility.
Thanks.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Rear diff/axle
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Rear diff/axle
I don't know. But from the exploded view in the parts catalog, it appears that you need to remove the wheel, then the hub from the axle. You remove the cap with 4 bolts at the end of the axle housing to get at the seal. I assume the hub is pressed on and requires a huge puller to remove it.
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 2 guests