I going to do an in frames overhaul on the engine of my 1944 H. The pistons and sleeves are out, the crank shaft looks good. I'm going to order an in frame overhaul kit which includes pistons, rings and sleeves. I need to order rod bearing but want to be sure to order the correct size. They come either standard, .010, .020, or .030 over. I'm going to mic the journals but need the specs. Would someone know the specs of the connecting rod journals ?
Thanks very much.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
crank shaft specs
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 22
- Joined: Sat Feb 03, 2018 2:06 am
- Zip Code: 97801
- Tractors Owned: 1944 Farmall H
1955 Farmall Cub
1965 1020 John Deere
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: crank shaft specs
Below serial 391358, 2.2475 - 2.2485. Above, 2.2975 - 2.2985. I assume '44 would be the lower numbers.
Mains below serial 391358, 2.4975 - 2.4985. Above, 2.5575 - 2.5585. If you are doing sleeve and Pistons and rod bearings, you should do main bearings too.
Mains below serial 391358, 2.4975 - 2.4985. Above, 2.5575 - 2.5585. If you are doing sleeve and Pistons and rod bearings, you should do main bearings too.
-
- 5+ Years
- Posts: 22
- Joined: Sat Feb 03, 2018 2:06 am
- Zip Code: 97801
- Tractors Owned: 1944 Farmall H
1955 Farmall Cub
1965 1020 John Deere
Re: crank shaft specs
Jim
Thanks very much, I appreciate the information and your recommendation.
Thanks very much, I appreciate the information and your recommendation.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Knob on Front for Hand Crank is Wicked Stuck
by FarmallCubGal » Sun Dec 17, 2023 4:23 pm » in Farmall H, HV, Super H, 300 & 350 - 6
- 2384
-
by FarmallCubGal
Sat Dec 23, 2023 8:54 am
-
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 0 guests