This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall 100 water pump
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Emilbluhm
- Posts: 1
- Joined: Wed Aug 19, 2020 5:30 am
- Zip Code: 44085
Farmall 100 water pump
I bought an after market water pump for my 100 and had the same problem one of your members had. (Smaller grooved pulley and belt rubbing on pump. So I took all the guts out and was going to put them in my old pump and everything was different. So I ordered a rebuild kit from yesterday's tractors. That ended up being junk. They didn't send the wire retainer that holds the bearing. So I made my own. But the grove that receives the wire was smaller than the original bearing. So I took it back apart and ended up destroying the crappy seal that they sent. I am so frustrated with the junk that they're selling. I have spent a lot of money on junk parts. Can someone please tell me where I can buy OEM parts so I can rebuild my pump properly?
-
Don McCombs
- Team Cub Mentor
- Posts: 17486
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Farmall 100 water pump
Have you tried your local CaseIH dealer?
Don McCombs
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
-
Super A
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: Farmall 100 water pump
Haven't bought one in years but the pump I bought came from NAPA. Fit fine.
Al
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
inairam
- 5+ Years
- Posts: 2821
- Joined: Wed Jul 08, 2015 10:24 am
- Zip Code: 19342
- Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide - Circle of Safety: Y
- Location: Glen Mills PA
Re: Farmall 100 water pump
I purchased a water pump for a 140 from steiners. I have not received is yet.
When you only have 9 horsepower you need to know the names of all of the ponies!
-
inairam
- 5+ Years
- Posts: 2821
- Joined: Wed Jul 08, 2015 10:24 am
- Zip Code: 19342
- Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide - Circle of Safety: Y
- Location: Glen Mills PA
Re: Farmall 100 water pump
I got the water pump for a 140 from Steiner. It went in fine. I had to go to napa to get the 1 3/8 id hose. You have to buy a gasket in addition to what comes with the pump. There a backing plate on the pump and you need the gaskerts on both sides of the plate.
- Attachments
-
-
Last edited by inairam on Sat Aug 22, 2020 8:00 pm, edited 2 times in total.
When you only have 9 horsepower you need to know the names of all of the ponies!
-
tst
- 10+ Years
- Posts: 5212
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Farmall 100 water pump
Napa use to offer a rebuild service if they did not have it also
-
Jim Becker
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Farmall 100 water pump
inairam wrote:I got the water pump for a 140 from Steiner. . . .
The water pump for a 100 is very different than the one for a 140. Availability and experience with a replacement for one model may not carry over to the other.
-
inairam
- 5+ Years
- Posts: 2821
- Joined: Wed Jul 08, 2015 10:24 am
- Zip Code: 19342
- Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide - Circle of Safety: Y
- Location: Glen Mills PA
Re: Farmall 100 water pump
Steiner does list this pump for the 100 and 130. https://www.steinertractor.com/IHS217-Water-Pump it looks like the pump on my 100.
I was commenting that Steiner had the correct pump for me and I assume the on listed for 100 will match the orginal.
I was commenting that Steiner had the correct pump for me and I assume the on listed for 100 will match the orginal.
When you only have 9 horsepower you need to know the names of all of the ponies!
-
Jim Becker
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Farmall 100 water pump
Fine. But the water pump for the 100 has 2 cast halves that, in a proper new or rebuilt unit, are together as a complete assembly. It requires 1 gasket to bolt it to the block. The backing plate and 2 gasket situation is not applicable. Sending someone in search of a backing plate and 2 gaskets would not be helpful.
-
inairam
- 5+ Years
- Posts: 2821
- Joined: Wed Jul 08, 2015 10:24 am
- Zip Code: 19342
- Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide - Circle of Safety: Y
- Location: Glen Mills PA
Re: Farmall 100 water pump
Jim, what I was trying to say was I had a good experence with Steiner on my 140 and that they list a water pump for the 100.
I do like to include any issues I had when I post, in this case with a 140 water pump, even if it not totally on point, so if someone comes across my post in the future on a 140, they will have a smoother go of it.
I do like to include any issues I had when I post, in this case with a 140 water pump, even if it not totally on point, so if someone comes across my post in the future on a 140, they will have a smoother go of it.
When you only have 9 horsepower you need to know the names of all of the ponies!
-
EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: Farmall 100 water pump
I bought an aftermarket water pump for my 130.
I ended up having to grind some meat off so the fan belt had enough clearance.
The angle of the flat portion on the cast tube from the rad was cast with the wrong angle.
That was very disappointing, but so far no problems since 2016.
I ended up having to grind some meat off so the fan belt had enough clearance.
The angle of the flat portion on the cast tube from the rad was cast with the wrong angle.
That was very disappointing, but so far no problems since 2016.
Just Do It !
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 18 guests
