Hydraulic pump

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
pva071
Posts: 1
Joined: Tue Jun 30, 2020 6:03 am
Zip Code: 42276

Hydraulic pump

Postby pva071 » Tue Jun 30, 2020 6:13 am

My IH 140 was pouring hydraulic oil into my crankcase. But if I had oil in the resivour the plows would lift and lower on demand. So I took the pump off and replaced the oil seal on the shaft that comes out of the pump, and holds the cog and reinstalled. Next I refilled the oil and it doesn't leak oil into the crankcase anymore, but plows wont lower. Any ideas why plow won't move?
Top
User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 16960
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Hydraulic pump

Postby Don McCombs » Tue Jun 30, 2020 10:42 am

Did you bleed the air from the system after refilling the reservoir?
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39

The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
Top
thecoolstew
Posts: 7
Joined: Mon Aug 10, 2020 3:41 pm
Zip Code: 28395

Re: Hydraulic pump

Postby thecoolstew » Fri Aug 14, 2020 3:34 pm

newbie here.... I have a cessna hydraulic pump that I want to replace the oil seal. my question is how do I get the old seal out? Thanks for any help
Top
  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 0 guests