* Kroil is bad stuff !

[Bugler]

I had a bearing on a gold trommel machine that was frozen solid from rust and it really looked like a for sure throw away,,,,, but I decided to see what my new can of Kroil would do for it. after soaking it for a couple of hours I started to get some movement in it,,,,,wow,,,,,,so now I took the seals off and start cleaning it up,,,, after a hour of cleaning and moving it,,,, I put it to the wire wheel and that puppy came alive,,,,,,,greased it up and reassembled it and now I have a like new bearing,,,,,,,, $ saved----$18, a hour of time and fuel to go get a new one,,,,,,,,,I highly recommend Kroil,,,and a lot of fun,,,,It's Bad Stuff

[pete1941]

Yep, have to agree with you Bugler, that is some BAD STUFF . Sounds like you are getting ready to do a little prospecting and pan-handling, huh? I think I would make a good gold transporter, hehehehehe Pete

[Bugler]

Yep, have to agree with you Bugler, that is some BAD STUFF . Sounds like you are getting ready to do a little prospecting and pan-handling, huh? I think I would make a good gold transporter, hehehehehe Pete

Pete your are welcome to go with me anytime and play in the dirt and for your effort you will get a even split of the gold,,,,,,, it is going for $923.10 a oz the last time I checked,,,, I got a camp on the claim and it is right on the river. I'll keep the porch lite burning.

[pete1941]

Sounds like an offer I can't resist. Pete

[billboyM]

I have looked around in our area for this "Krol" but haven't located it
Did you have to order, or did you find it somewhere?
Thanks,
Bill

[Bugler]

Here is the link I used to order Kroil,,,,,,, a super good deal,,,, and fast shipping. http://www.kanolabs.com/google/
Have fun with the Kroil.

[Poncho]

If you have a Fleet Farm, I know they have it, you may also check Tractor Supply

[68427vette]

they dont sell it around here.. we use PB BLASTER!!! just as good...

[John *.?-!.* cub owner]

they dont sell it around here.. we use PB BLASTER!!! just as good...

Country will be along to straighten you out before long.

[Bugler]

I have tested them side by side,,IMHO,,,Blaster cant hold a candle to Kroil

[ih-cubcadet-man]

i agree, i always thought pb was good, but its nothing like kroil

[johnbron]

i agree, i always thought pb was good, but its nothing like kroil

Too each there own. I have used both with no results of one being superior over the other.

[59cub]

Kroil is also "bad stuff" if you breathe in vapors while using it to lube drill bits or any other metal cutting device. A guy I know got an expensive ride in an ambulance after breathing it while lubricating a drill bit in action. ok now, but knocked him out, 6'3" 250lbs. It does work great on rusted parts however! just be careful!

[LiL' Red]

Works great as a tapping fluid.

[Bugler]

Kroil is also "bad stuff" if you breathe in vapors while using it to lube drill bits or any other metal cutting device. A guy I know got an expensive ride in an ambulance after breathing it while lubricating a drill bit in action. ok now, but knocked him out, 6'3" 250lbs. It does work great on rusted parts however! just be careful!

I never breath any fumes that I make in the shop,,,,always wear a canister face mask if I am playing like Dr Frankinstein. be careful,,I use wd40 for drilling and cutting threads. Kroil is on my Best to Use List.