Hi, From PA
I work at a forklift service and repair business in the parts department so I am familiar with parts lookup and parts manuals.
I have a Cub 154 Lo-Boy with mower deck. It is in decent condition the engine runs good.
I would like to replace the wiring on the tractor as they are brittle and the coating is peeling off.
Also the alternator needs rebuilt and need a new muffler and some shields to cover the pulley behind the seat.
Does anybody have suggestions on how best to remove the old muffler as it looks like it is rusted tight at the pipe threads.
As soon as I figure out how to paste a picture I will
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New member
- Don McCombs
- Team Cub Mentor
- Posts: 17488
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: New member
On removing the muffler, you can start by soaking those threads in your favorite penetrant. PB Blaster and Kroil are two good ones. After several weeks of repeated applications try some heat. Let us know if you are successful.
- Dale Finch
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
-
- Posts: 2
- Joined: Sat Apr 16, 2022 2:32 pm
- Zip Code: 17529
Re: New member
Thanks for the responses. Below are the model and serial numbers
Model: 154
Serial: 010313
Mower
Model: 326
Series: 601U1111
Model: 154
Serial: 010313
Mower
Model: 326
Series: 601U1111
- Pap
- 501 Club
- Posts: 653
- Joined: Mon Jun 07, 2021 8:43 pm
- Zip Code: 38401
- Tractors Owned: 1947 Cub ( Err Err )
I could not say tractor when I was 2 years old so I called it Err Err.
I loved this tractor then and I still love it now. - Circle of Safety: Y
- Location: Columbia, Tennessee
Re: New member
Welcome to the forum eyehooks.
Enjoy Your Ride.
Enjoy Your Ride.
Are We Having Fun Yet ?
'47 cub ( Err Err )
'47 cub ( Err Err )
-
- Team Cub Mentor
- Posts: 5641
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: New member
Welcome aboard, eyehook! The 154 was equipped with a starter/generator and did not have an alternator. Please clarify what you have.
- Mike in Louisiana
- 10+ Years
- Posts: 7831
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: New member
Welcome to the forum.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: New member
Welcome to the Forum, eyehook!
Take some time and read through a few threads to acquaint yourself with the Forum:
Now that you’ve logged your 2nd post on the Forum, you'll have access to the all the PDF Manuals on this site. There’s a few ways to do that:
You'll be able to download an Owner's Manual and any service manuals that interest you. Implement Manuals are also available.
There are a lot of good threads dealing with Cub repair and maintenance in the How To Forum. Located here: http://farmallcub.com/phpBB2/viewforum.php?f=11
We’d encourage you to take the Safety Test located in the Safety Forum: http://farmallcub.com/phpBB2/viewtopic.php?f=33&t=68084
Take some pictures of your tractor and post them, we’d like to see it.
Remember:
Glad you joined us.
Take some time and read through a few threads to acquaint yourself with the Forum:
- Welcome Wagon
- How to Upload Pictures to a Post
- Forum Picture Posting And Other Interesting Things You Can Do
- Using the Forum
Now that you’ve logged your 2nd post on the Forum, you'll have access to the all the PDF Manuals on this site. There’s a few ways to do that:
- From a desktop or laptop, go to "Quick Links" in the upper left corner of your screen. Hit that and a pull-down appears where you'll find "PDF Manuals".
- You can also go to “Cub Info” in the upper toolbar, then hit “Rudi’s Manuals”. From there, you can access a variety of information.
- If you're using a phone, go to the "Links Directory" (second category down the main page). Once in "Links Directory" , scroll down to the second section "Tractor Parts & Manuals" and you'll find them there.
You'll be able to download an Owner's Manual and any service manuals that interest you. Implement Manuals are also available.
There are a lot of good threads dealing with Cub repair and maintenance in the How To Forum. Located here: http://farmallcub.com/phpBB2/viewforum.php?f=11
We’d encourage you to take the Safety Test located in the Safety Forum: http://farmallcub.com/phpBB2/viewtopic.php?f=33&t=68084
Take some pictures of your tractor and post them, we’d like to see it.
Remember:
- Pictures are limited to 500 KB file size. Use an image reducer app or program to downsize pics.
- When you have a specific question, start a new thread in the appropriate sub-forum.
- Before posting, use the Preview button before hitting Submit--it'll show you exactly what your post will look like, including pictures.
- When adding your comments to a thread, be sure to look at the date of the last poster. If it’s more than a 6 months old, the posters are probably not going to see it. Consider starting a new thread.
Glad you joined us.
- Tired_Iron
- Cub Star
- Posts: 132
- Joined: Thu Apr 09, 2020 1:23 pm
- Zip Code: 53147
- Tractors Owned: 1937 Farmall F-12
1939 Farmall F-14
1944 Farmall M
1945 Farmall B
1947 Farmall H
1955 Farmall 400 /w 33A Loader
Grounds Crew
Simplicity 7112H
Simplicity Sunstar 18 - Circle of Safety: Y
- Location: Lake Geneva, WI
Re: New member
Welcome to the Forum!
Return to “Introduce Yourself”
Who is online
Users browsing this forum: No registered users and 17 guests