Hello all.
Joined some time ago and been lurking but haven't introduced myself. Long time collector of farm equipment. I recently purchased most of 3 cubs, and began putting together 2 good ones from the 3. My wife became interested and now one of the cubs is hers. We are currently working -together- on her first restoration. Hopefully not her last.
I am an all breeds lover, with a lean toward the green side but my wife has turned out to be red through and through!
I would like to hear some advice on the best paint to use. Spray bomb? Brush? 2 part? Epoxy?
Thanks for letting me join your forum. In the months I have been a member this forum has been a tremendous help. Especially with removing platforms, I have removed 2 of the 3 platforms, with one to go. I agree it isn't fun, but using the techniques I learned about here it was easier than I expected. And they were rusted BAD.
Dave
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hello all, new member here
-
- Posts: 14
- Joined: Sun Mar 07, 2021 10:46 am
- Zip Code: 20646
Hello all, new member here
-Dave
1948 Cub- this is the 2023 giveaway cub
1949 Cub- Martin
1951 Cub- Couple’s cub
1929 John Deere GP
1948 Cub- this is the 2023 giveaway cub
1949 Cub- Martin
1951 Cub- Couple’s cub
1929 John Deere GP
- Pap
- 501 Club
- Posts: 653
- Joined: Mon Jun 07, 2021 8:43 pm
- Zip Code: 38401
- Tractors Owned: 1947 Cub ( Err Err )
I could not say tractor when I was 2 years old so I called it Err Err.
I loved this tractor then and I still love it now. - Circle of Safety: Y
- Location: Columbia, Tennessee
Re: Hello all, new member here
Welcome to the forum. Good luck with your project.
Are We Having Fun Yet ?
'47 cub ( Err Err )
'47 cub ( Err Err )
-
- Team Cub
- Posts: 11859
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Hello all, new member here
Dave, welcome to the forum. My only comment on paint would be that if you want to use a hardener you must have supplied air. Otherwise, all the choices you listed are viable.
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- Mike in Louisiana
- 10+ Years
- Posts: 7831
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: Hello all, new member here
Welcome to the forum.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Return to “Introduce Yourself”
Who is online
Users browsing this forum: No registered users and 12 guests