This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Final drives
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- LYNYRD
- 10+ Years
- Posts: 238
- Joined: Sat Mar 29, 2003 9:26 am
- Zip Code: 70453
- Tractors Owned: 1974 IH Cub
1975 IH Cub
MF 135
TO-20
Ford 3000
12 D Harrow Plow
151 Disc Plow - Circle of Safety: Y
- Location: LA, Pine Grove
Final drives
I am about to remove the final drives on my cub, need to have 3 implement bolt hole rethreaded and need to replace leaking seals. How many seals are there in each final drive and what are the I-H numbers? All help appreciated.
-
- 10+ Years
Charles,
Read the message to "New users and visitors". The first message on the board. Then go to the FAQ's and your questions should be answered.
I would also suggest getting a TC-37F Parts Manual and a Service Manual. These have proved invaluable to me. http://www.binderbooks.com
Read the message to "New users and visitors". The first message on the board. Then go to the FAQ's and your questions should be answered.
I would also suggest getting a TC-37F Parts Manual and a Service Manual. These have proved invaluable to me. http://www.binderbooks.com
Who is online
Users browsing this forum: No registered users and 52 guests