Steering arm shims

The Cub Club -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
10+ Years
10+ Years
Posts: 107
Joined: Tue Nov 04, 2003 7:49 am
Location: Milton, Florida

Steering arm shims

Postby Slappy » Tue Jan 27, 2004 7:14 am

While working on the front end I found that the steering arm had no shims between the arm and the bottom plate. I ordered shims but I'm not sure how much up and down play in the tie rod end is appropriate. Does anyone have any ideas here? Or perhaps someone can tell me the approximate shim thickness on their Cub to give me some idea. Thanks in advance.

Jim Becker
Team Cub
Team Cub
Posts: 15910
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Tue Jan 27, 2004 8:21 am

You don't really want any. If the steering isn't binding, you are OK as is.

  • Similar Topics
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: ericofmaine, Floater and 4 guests