Farmall Cub

I noticed the belt on woods 59 on my loboy with a fast hitch was starting to delaminate and wanted to replace it. I used the list on this post https://www.farmallcub.com/phpBB2/viewt ... 1&t=101214 and purchased a

woods 59 c 2 4152 5/8" Top Width X 213.4" Outside Measurement Crossed From:115-215 OREGON 66-681 SILVER STREAK

The Oregon is what I found but it is longer than the belt I took off by 2-3 inches. Of course, there are no markings on the old belt.

Any suggestions?

edit

I noticed it is a woods 59 CL-4 which is not on the list.

My woods 59 Has that woods 4152 part number. I use a B210 belt.

B section and fractional horse power belts are measured different

Sectional belts measure inside diameter
Fractional hp belts measure outside diameter. so if you want a b section belt you need to subtract 3”

Woods 59CL-4 3492, W172, B206
or 4152, W180, B-213

Tim, Thank you.