Can I interchange the steering box and the complete cast iron assembly from a 1953 to a 1951 cub? They look interchangeable but wanted to confirm prior to disassembly.
I have never attempted this and wondering how hard it is to do?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Steering box and assembly
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Tractor Rod
- Cub Star
- Posts: 104
- Joined: Sun Dec 27, 2020 10:48 am
- Zip Code: 67357
Steering box and assembly
Can I interchange the steering box and the complete cast iron assembly from a 1953 to a 1951 cub? They look interchangeable but wanted to confirm prior to disassembly.
I have never attempted this and wondering how hard it is to do?
-
Gary Dotson
- Team Cub Mentor
- Posts: 5637
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Steering box and assembly
Yes, everything should be the same. Not too bad of a job.
-
Tractor Rod
- Cub Star
- Posts: 104
- Joined: Sun Dec 27, 2020 10:48 am
- Zip Code: 67357
Re: Steering box and assembly
Thanks Gary. Will I need any seals and gaskets, etc. and where would you buy those?
-
Cubfriend
- 10+ Years
- Posts: 1176
- Joined: Sat Jan 28, 2012 3:13 pm
- Zip Code: 68803
- Tractors Owned: 1948 Cub, Kittie; 1948 Cub, Harold; 1949 Cub, 49er; 1951 Cub, Tucker; 1951 Cub, Homely; 1956 Cub High Crop; 1957 Cub Loboy; 57 Cub Loboy w/fasthitch + 194 plow; 1958 Cub LoBoy w/FH, Popeye; 1961 Cub, Beater; #1-1962 Cub Loboy Dually (Originally Orange) w/Foot Throttle; #2-1962 Cub Loboy Dually (Originally Orange) w/Foot throttle; Yellow 1963 Cub Loboy and blade; 1970 Cub, Cubbie; and 5 other Cubs in various stages of disaasembly and disrepair; 1962 Cub Cadet Original; 2 other Cub Cadet Originals; Cub Cadet 100; Cub Cadet 124 w/Creeper; Cub Cadet 147; 2 Cub Cadet 129's; Cub Cadet 149; 1948 Allis Chalmers C w/single frontwheel; 1944 Farmall H w/Tokhiem Cab; 2 One Point Fasthitch Carriers; 2-#100 Fasthitch Rear Blade; 2 Sets Cub 144 Cultivators; 2 Sets Cub #252 Cultivators; 3 Cub #193 Mouldboard Plows; 1 Cub #193 Slatted Plow; 1 1948 Cub-54 Snow Plow; 3 Cub-54 49-5 Snow Plows; Cub #6 Tool Bar w/Disc Blades & Middlebuster. 2-#105 sickle mowers, #152 disc plow
- Circle of Safety: Y
- Location: Grand Island, Nebraska
Re: Steering box and assembly
You could also change it for a late model with 24 tooth gear to make steering easier. You need to use the matching steering shaft for the steering wheel. Parts can be bought from TM Tractor parts at the bottom of this page. Or bushings can be bought from bronzebushings.com for a lot less.
Frank
Who is online
Users browsing this forum: Dale Finch and 33 guests
